Skip to content

Urgent: Nov 20, 2026 — HCS 2024 Deadline. Get ready →

EPCRA §312UT

Utah Tier II reporting: how and where to file

Utah's Department of Environmental Quality manages Tier II data for the Utah SERC and requires each facility to use EPA's Tier2 Submit, in the current reporting year's version (released each November).

Utah Department of Environmental Quality, Division of Environmental Response and Remediation, for the Utah SERC. Source: EPA's page of state Tier II procedures · October 28, 2026

What Utah asks for

Each point is followed by the words of EPA's page of state procedures.

How to file

Utah's Department of Environmental Quality manages Tier II data for the Utah SERC and requires each facility to use EPA's Tier2 Submit, in the current reporting year's version (released each November).

“The Utah Department of Environmental Quality (UDEQ) is tasked by state statute to manage Tier II data for the Utah State Emergency Response Commission (SERC).” source
“A new version of the EPA Tier2 Submit is created in November of each year. Facilities must use the latest software version each year to avoid errors in submissions.” source

The federal rule underneath

EPCRA section 312 applies to a facility that the OSHA HazCom Standard requires to keep an SDS for a hazardous chemical present at any one time at or above 10,000 lb, or at or above 500 lb or its threshold planning quantity, whichever is lower, for an extremely hazardous substance (40 CFR 370.10(a)). The 10,000 lb figure is the general case: at a retail gas station the thresholds are 75,000 gallons of gasoline and 100,000 gallons of diesel fuel (all grades combined), and they apply only to fuel in tanks entirely underground that met every applicable underground storage tank requirement at all times during the preceding calendar year (40 CFR 370.10(a)(2)(ii) and (iii)); otherwise the general threshold applies. The report covers the previous calendar year and is due March 1 (40 CFR 370.45). Below every threshold, a request still has to be answered: when your LEPC, SERC or fire department asks for Tier II information, the threshold is zero and the information is due within 30 days (40 CFR 370.10(b), 370.45(b)). Where Utah's rules above are stricter, they apply on top.

The full federal picture, Tier I versus Tier II, counting and penalties, is on the EPCRA Tier II hub. The list that feeds it is the chemical inventory.

HazComFast keeps each jobsite's chemical quantities next to its safety data sheets and exports the Tier II data as an Excel workbook, a CSV file and a PDF summary.

Utah Tier II FAQ

How do I file Tier II in Utah?

Utah's Department of Environmental Quality manages Tier II data for the Utah SERC and requires each facility to use EPA's Tier2 Submit, in the current reporting year's version (released each November).

More on Utah

Tier II in other states

These 51 pages (the 50 states and DC) quote each state's own page or EPA's page of state procedures. For a territory, EPA's State Tier II Reporting Requirements and Procedures names the agency and the filing method.

Sources

Utah's requirements read on EPA's page of state Tier II procedures on October 28, 2026; 40 CFR part 370 read on the eCFR on September 26, 2026. States change portals and fees; confirm with Utah Department of Environmental Quality, Division of Environmental Response and Remediation, for the Utah SERC before you file. General guidance, not legal advice.

Keep the chemical list behind your Tier II report current

Tier II is an EPCRA filing to your state and local agencies, not an OSHA citation. The same chemical inventory feeds your SDS binder and the report, so keep it in one place.

New sign-ups are paused. The free tools below need no account, and customers can log in as usual.

Your account keeps working as usual. Cancel anytime.