Skip to content

Urgent: Nov 20, 2026 — HCS 2024 Deadline. Get ready →

29 CFR 191029 CFR 1910.1229 CFR 1904

OSHA safety for general industry: find the rule for the work

Most workplaces outside construction, maritime and agriculture follow the general industry standards of 29 CFR Part 1910. The task decides the rule more than the company's trade: construction, alteration or repair inside a plant falls under Part 1926 (29 CFR 1910.12). Pick the work and the hazard, and each path below gives the standard, program, field check, training and record.

Checked against the eCFR · November 16, 2026

At a glance

Part 1910

The general industry standards, from walking-working surfaces (Subpart D) to toxic and hazardous substances (Subpart Z).

29 CFR 1910

Construction inside a facility

Construction, alteration or repair, including painting and decorating, is construction work, and Part 1926 applies to every employee engaged in it.

1910.12(a), (b)

Written programs

A written HazCom program, a written respiratory protection program wherever respirators are necessary, and documented energy control procedures.

1910.1200(e)(1), 1910.134(c)(1), 1910.147(c)(4)(i)

Injury records

The 300 Log and 301 forms, unless the company had 10 or fewer employees company-wide at all times during the last calendar year or the establishment is in a partially exempt industry.

1904.1(a), 1904.2(a)

Severe injuries

Every employer reports a work-related fatality within 8 hours, and an in-patient hospitalization, amputation or loss of an eye within 24 hours.

1904.39(a)(1), (a)(2)

State Plans

22 State Plans cover private employers, and several of them publish standards of their own.

29 CFR Part 1952

Which work are you doing?

The company's sector does not settle the rule on its own. Start from the task in front of the crew and the questions it raises.

General industry work, the questions to answer first, and where to start
WorkQuestions to answer firstWhere to start
ProductionWhich machines, chemicals and noise sources does the task use? Who clears jams or changes tooling, and with which energy isolated?
Maintenance and repairIs the machine serviced with its energy isolated (1910.147)? Does the job alter or repair the building or its systems? Construction, alteration and repair are construction work (1910.12(b)).
Warehouse and distributionWhich powered industrial trucks run there, who operates them, and how are pedestrians kept clear? Where are chemicals stored and batteries charged?
LaboratoryAre hazardous chemicals used on a laboratory scale? Then the employer carries out a written chemical hygiene plan (1910.1450(e)(1)), and HazCom reaches the lab through its labels, SDS and training paragraphs (1910.1200(b)(3)).
Construction work in a facilityIs it construction, alteration or repair, including painting and decorating? Then Part 1926 applies to that work (1910.12(a), (b)). The same plant can run production under Part 1910 and a renovation crew under Part 1926.

Choose the hazard

Pick what the task involves. The answer gives the standard, then the program, the field check, the training and the record it calls for, with the paragraph behind each rule.

A line that states an OSHA rule cites its paragraph of 29 CFR. State Plans can add their own rules.

Hazardous energy

Servicing or maintenance where a machine could start up or release stored energy, such as clearing a jam or changing tooling.

Lockout/tagout hub

Machines

Points of operation, ingoing nip points, rotating parts, flying chips and sparks at a machine.

Machine guarding guide

Hazardous chemicals

Any product with a safety data sheet used in production, cleaning, maintenance or the lab.

Chemical inventory hub

Noise

Presses, compressors, saws, grinders and other loud equipment.

Hearing conservation training guide

Respirators

Spray painting, welding fume, dusty grinding, or any task where respirators are necessary to protect health.

Respiratory protection hub

Forklifts

Powered industrial trucks in warehouses, on docks and in production aisles.

Forklift safety hub

Emergencies and fire

Evacuation, alarms, exit routes and portable fire extinguishers.

Emergency action plan hub

Injury and illness records

A work-related injury or illness at any establishment of the company.

OSHA recordkeeping hub

Choose the document

For each hazard: the standard, the program, the check in the field, the training and the record to keep. The tools linked in each row prepare the document, and the guides explain the rule.

Standard, program, field check, training and record for each general industry hazard
HazardProgramField checkTrainingRecordTools and guides
Hazardous energy29 CFR 1910.147An energy control program of procedures, training and periodic inspections (1910.147(c)(1)), with a documented procedure for each machine unless every condition of the exception is met (1910.147(c)(4)(i)).A periodic inspection of each energy control procedure at least annually (1910.147(c)(6)(i)).Authorized and affected employees, retrained when job assignments, machines, processes or the procedures change (1910.147(c)(7)(iii)(A)).A certification of training with each employee's name and dates of training (1910.147(c)(7)(iv)).
Machines29 CFR 1910.212One or more methods of guarding for each machine, such as barrier guards, two-hand tripping devices or electronic safety devices (1910.212(a)(1)).Guards in place and working before the machine runs. Robots and conveyors raise their own guarding questions, covered in the guide.Anyone who services the machine receives the energy control training of 1910.147(c)(7).The energy control procedure of each machine that is serviced (1910.147(c)(4)(i)).
Hazardous chemicals29 CFR 1910.1200A written hazard communication program with a list of the hazardous chemicals known to be present (1910.1200(e)(1)).An SDS in the workplace for each hazardous chemical used (1910.1200(g)(1)), readily accessible during each work shift (1910.1200(g)(8)), and a workplace label on each container (1910.1200(f)(6)).At initial assignment, and whenever a new chemical hazard is introduced into the work area (1910.1200(h)(1)).The chemical list of the program and copies of the safety data sheets in the workplace (1910.1200(e)(1), (g)(8)).
Noise29 CFR 1910.95A hearing conservation program whenever exposures equal or exceed an 8-hour time-weighted average of 85 decibels (1910.95(c)(1)), with audiometric testing made available to those employees (1910.95(g)(1)).A monitoring program when information indicates an exposure may reach that level (1910.95(d)(1)).Each employee at or above 85 decibels, with the training repeated annually (1910.95(k)(1), (k)(2)).Noise exposure measurements kept two years, audiometric test records for the duration of employment (1910.95(m)(3)(i), (m)(3)(ii)).
Respirators29 CFR 1910.134A written respiratory protection program with worksite-specific procedures wherever respirators are necessary or the employer requires them (1910.134(c)(1)).A medical evaluation before the fit test or first use (1910.134(e)(1)), and a fit test before initial use of a tight-fitting facepiece and at least annually after that (1910.134(f)(2)).Each wearer demonstrates knowledge of why the respirator is necessary, its limits, and how to inspect, put on, remove and seal-check it (1910.134(k)(1)).Medical evaluation and fit test records, kept under 1910.134(m).
Forklifts29 CFR 1910.178Operator training and evaluation, so that each operator is competent to operate the truck safely (1910.178(l)(1)(i)).An examination before the truck is placed in service, at least daily, or after each shift where trucks run round the clock (1910.178(q)(7)).An evaluation of each operator's performance at least once every three years (1910.178(l)(4)(iii)).A certification with the operator's name, the date of training, the date of evaluation and who trained or evaluated (1910.178(l)(6)).
Emergencies and fire29 CFR 1910.38 and 1910.157An emergency action plan wherever an OSHA standard calls for one (1910.38(a)), in writing, or communicated orally by an employer with 10 or fewer employees (1910.38(b)).Portable extinguishers visually inspected monthly and given an annual maintenance check (1910.157(e)(2), (e)(3)).Where extinguishers are provided for employee use, an education program at initial employment and at least annually after that (1910.157(g)(1), (g)(2)).The date of the annual extinguisher maintenance, kept one year after the last entry or the life of the shell, whichever is less (1910.157(e)(3)).
Injury and illness records29 CFR 1904.4The OSHA 300 Log and 301 forms, unless the company had 10 or fewer employees company-wide at all times during the last calendar year or the establishment is in a partially exempt industry (1904.1(a), 1904.2(a)). Every employer, exempt or not, reports a work-related fatality within 8 hours and an in-patient hospitalization, amputation or loss of an eye within 24 hours (1904.39(a)(1), (a)(2)).Each case run through work-relatedness, new case and the general recording criteria before it goes on the log.Each employee is told how to report a work-related injury or illness, and that the employer may not retaliate for a report (1904.35(a)(1), (b)(1)(iii)).The 300A summary posted from February 1 to April 30 (1904.32(b)(6)), and the records kept five years (1904.33(a)).

A template prepares the document. It is not a finding of compliance for the site that uses it.

What changes by industry?

The same standards apply in every sector, and the tasks and products differ. Each industry page starts from the work of that sector.

All sectors, construction trades included, are on the industries page.

State rules and related guidance

State Plans

22 State Plans cover private employers in their states, and several publish general industry standards of their own.

OSHA State Plans

1910 or 1926, side by side

The requirement pages put the general industry rule and the construction rule next to each other, with the paragraph behind each sentence.

OSHA requirements explained

The standards themselves

Each standard page quotes the CFR text of the section, paragraph by paragraph.

OSHA standards index

Lockouts that can't skip a step

Each lockout follows the order of the energy control rule, and the permits that depend on it wait for it.

Zero energy, point by point

A lockout can't go active until every point has its zero-energy check recorded, and on an electrical point, only a meter test counts.

When the person isn't there

When the person who applied a lock isn't there, removal follows your written exception procedure: absence verified, contact attempts logged. When they come back, they're told before they can lock anything else.

Removal in the rule's words

Removal won't record until the area check and the all-clear are both confirmed, in the exact (e)(1) and (e)(2) wording, in English or Spanish.

Permits tied to the lockout

Name the isolation points on the permit and it won't issue until each one is locked out under that permit, and it won't close while any of those locks is still on. When a lock comes off, the permit shows it and its supervisor is notified.

In the basement

In the basement mechanical room with no signal, the lockout still records, points and signature included, and posts once when the app is back in coverage.

General industry FAQ

What is general industry under OSHA?

General industry is OSHA's term for the workplaces covered by the standards of 29 CFR Part 1910. Construction work has its own Part 1926 (29 CFR 1910.12), and maritime and agriculture have their own parts as well.

Does Part 1910 apply to a construction company?

Construction work follows Part 1926, whoever does it (29 CFR 1910.12(a)). Some 1910 rules reach construction by adoption, such as hazard communication through 1926.59. When the same company runs a shop or a warehouse, the work there follows Part 1910.

Who decides whether a task is construction or general industry?

The work itself. Section 1910.12(b) defines construction work as work for construction, alteration and/or repair, including painting and decorating, and Part 1926 applies to every employee engaged in it (1910.12(a)). The company's industry code does not settle it.

Which written programs does a general industry employer need?

It depends on the hazards present: a written HazCom program where hazardous chemicals are present (1910.1200(e)(1)), a written respiratory protection program where respirators are necessary (1910.134(c)(1)), documented energy control procedures for machines that are serviced (1910.147(c)(4)(i)), and an emergency action plan when a standard calls for one, in writing or, with 10 or fewer employees, communicated orally (1910.38(a), (b)).

Do small companies keep OSHA injury records?

A company with 10 or fewer employees company-wide at all times during the last calendar year does not keep the OSHA injury and illness records unless OSHA or the Bureau of Labor Statistics asks in writing. It still reports a fatality, an in-patient hospitalization, an amputation or the loss of an eye (1904.1(a), 1904.39).

Sources

Paragraphs of 29 CFR 1904, 1910.12, 1910.38, 1910.95, 1910.134, 1910.147, 1910.157, 1910.178, 1910.212, 1910.1200 and 1910.1450 checked against the eCFR (current as of November 12, 2026) on November 16, 2026. General guidance, not legal advice; State Plans can add requirements.

Get the Binder in Order Before the Inspector Arrives. Are You Ready?

OSHA inspections come unannounced, apart from the few exceptions listed in 29 CFR 1903.6. Get the binder in order before the opening conference, not during it.

Serious Violation

$16,550

per violation (max)

HazComFast Pro

$199/mo

10 jobsites, unlimited chemicals, unlimited workers

New sign-ups are paused. The free tools below need no account, and customers can log in as usual.

Your account keeps working as usual. Cancel anytime.