GHS / HazCom term · Glossary
GHS02 (Flame)
Verified vs OSHA sources · 2026-10-05
The GHS hazard pictogram showing a flame. It covers the whole family of fire hazards: flammable gases, aerosols, liquids, and solids; pyrophoric (auto-igniting) liquids and solids; self-heating substances; substances that emit flammable gas when wet; the less-reactive self-reactives and organic peroxides (Types C–F); and desensitized explosives.
Also known as: flame pictogram, flammable symbol
On this page
GHS02 (Flame) at a glance
- The broadest physical-hazard pictogram — covers many flammable and self-igniting classes.
- Includes flammable gas/aerosol/liquid/solid, pyrophorics, self-heating, and “emits flammable gas when wet.”
- Also used for desensitized explosives and the less-reactive self-reactives / organic peroxides (Types C–F).
- Signal word is usually “Danger” (Category 1–2) or “Warning” (lower categories).
In plain English
The “this can catch fire” symbol — the most common hazard symbol you'll see. It covers everything that ignites easily, heats up on its own, or gives off flammable gas, from gasoline to certain metals and aerosols.
What the source says, in summary
H225: Highly flammable liquid and vapor. H228: Flammable solid. H250: Catches fire spontaneously if exposed to air.
In context
A classification or labeling concept from the UN Globally Harmonized System, adopted into US law through OSHA's Hazard Communication Standard (29 CFR 1910.1200) and its appendices.
Where this is written in OSHA's rules
- 29 CFR 1910.1200 App CRead on eCFR / OSHA.gov
Example
Acetone, a Flammable Liquid Category 2, carries the flame pictogram (GHS02) with the signal word “Danger” and H225, “Highly flammable liquid and vapor.” The same flame appears on a can of aerosol spray paint and on pyrophoric materials that ignite in air.
Why it matters
The flame is the hazard workers meet most, so it's also the one most often mislabeled or ignored around ignition sources. Because it spans so many classes, getting the specific class and category right — not just “it's flammable” — drives correct storage, ventilation, and the rest of the label under 1910.1200.
Flame (GHS02) vs. flame over circle (GHS03)
The plain flame (GHS02) means the substance itself burns or self-ignites. The flame over a circle (GHS03) means an oxidizer — it doesn't necessarily burn itself but feeds fire by supplying oxygen. They look similar but signal opposite roles in a fire.
Hazard families that use the flame pictogram (GHS02)
| Hazard family | Example H-code |
|---|---|
| Flammable gas / aerosol | H220 / H222 |
| Flammable liquid | H224–H226 |
| Flammable solid | H228 |
| Pyrophoric / self-heating | H250 / H251 |
| Emits flammable gas when wet | H260 / H261 |
GHS02 (Flame): frequently asked questions
- What does the flame pictogram mean?
- It signals a fire hazard: the substance is flammable, pyrophoric (ignites in air), self-heating, or emits flammable gas when wet. It's the broadest physical-hazard pictogram in GHS.
- What's the difference between the flame and the flame-over-circle?
- The flame (GHS02) marks something that burns or self-ignites. The flame over a circle (GHS03) marks an oxidizer, which feeds a fire by releasing oxygen even if it doesn't burn itself.
- Does the flame pictogram cover aerosols?
- Yes — flammable aerosols (Category 1 and 2) use the flame pictogram, along with flammable gases, liquids, and solids and several self-igniting classes.
Related terms
Free tools for this
Governing OSHA standards
More GHS terms
A GHS health-hazard class for the harmful effects that follow a single dose, several doses within 24 hours, or a 4-hour inhalation exposure. Chemicals are sorted into categories by route (oral, dermal, inhalation) using LD50/LC50 cut-offs — Category 1 is the most toxic. OSHA's HazCom standard uses Categories 1–4.
Aspiration HazardA GHS health-hazard class for chemicals that can be fatal if swallowed and then enter the airways — directly or by vomiting — causing chemical pneumonia or lung injury. Thin, low-viscosity hydrocarbons (gasoline, kerosene, lamp oil) are the classic example. It is Category 1, with the health-hazard pictogram (GHS08) and signal word “Danger.”
CarcinogenicityA GHS health-hazard class for chemicals that cause cancer or increase its incidence. GHS (and OSHA's HazCom standard) sorts carcinogens into Category 1A (known human carcinogen), 1B (presumed, from animal evidence), and Category 2 (suspected). Carcinogens carry the health-hazard pictogram (GHS08) and a hazard statement such as H350 (“May cause cancer”).
Chemicals Under PressureA physical-hazard class added by OSHA's 2024 HCS update (aligning with GHS Revision 7) for liquids or solids pressurized with a gas, held in pressure receptacles other than aerosol dispensers and not classified as gases under pressure. It is categorized by the flammability of its contents and always carries the gas-cylinder pictogram (GHS04) for the pressure hazard.
ClassificationThe process of evaluating the available scientific evidence for a chemical against the GHS criteria to decide whether it is hazardous and, if so, the hazard class and category of each effect. Classification is the first step in HazCom — its result determines every label element (pictogram, signal word, hazard and precautionary statements) and SDS content.
Corrosive to MetalsA GHS physical-hazard class for chemicals that, by chemical action, will materially damage or even destroy metals. It is a single category (Category 1), determined by corrosion-rate testing on steel and aluminum, and uses the corrosion pictogram (GHS05) with the hazard statement H290. It is a separate hazard from skin corrosion, even though both use GHS05.
Desensitized ExplosivesA physical-hazard class added by OSHA's 2024 HCS update (GHS Revision 7) for solid or liquid explosives that have been phlegmatized — wetted or diluted — to suppress their explosive properties for safe transport and storage. It has four categories based on the corrected burning rate, and uses the flame pictogram (GHS02), not the exploding-bomb.
Globally Harmonized System (GHS)An internationally agreed framework created by the United Nations (first adopted in 2003) that standardizes how chemical hazards are classified and communicated — using common hazard classes, pictograms, signal words (Danger / Warning), and coded hazard (H) and precautionary (P) statements on labels and safety data sheets. The US adopted GHS into law through OSHA's 2012 Hazard Communication Standard update.
Sources & verification
- 29 CFR 1910.1200 App C (eCFR / OSHA.gov)
- OSHA — Hazard Communication Pictograms
- OSHA — Appendix C to §1910.1200 (label elements)
Reviewed by HazComFast against eCFR, OSHA.gov, NIOSH, and the Federal Register. Last reviewed 2026-10-05. This glossary is general information, not legal advice; OSHA State-Plan states (e.g. California, Michigan) may adopt stricter requirements.
Put GHS02 (Flame) into practice
Don't just read the definition — apply it. Use the free GHS Label Generator to put real numbers behind GHS02 (Flame) for your jobsite.
Get the Binder in Order Before the Inspector Arrives. Are You Ready?
OSHA does not give advance notice of inspections (29 CFR 1903.6). Get the binder in order before the opening conference, not during it.
Serious Violation
$16,550
per violation (max)
HazComFast Pro
$199/mo
10 jobsites, unlimited chemicals, unlimited workers
New sign-ups are paused. The free tools below need no account, and customers can log in as usual.
Your account keeps working as usual. Cancel anytime.