Skip to content

Approaching: Nov 20, 2026 — HCS 2024 Deadline. Get ready →

GHS / HazCom term · Glossary

GHS05 (Corrosion)

Verified vs OSHA sources · 2026-10-05

The GHS hazard pictogram showing a hand and a surface being eaten away. It covers three “corrosion” hazards: skin corrosion (Category 1), serious eye damage (Category 1), and corrosive to metals (Category 1). It signals a substance that chemically destroys living tissue and/or metals.

29 CFR 1910.1200 App C

Also known as: corrosion pictogram, corrosive symbol

GHS05 (Corrosion) at a glance

  • Covers three Category 1 hazards: skin corrosion, serious eye damage, and corrosive to metals.
  • Hazard statements: H314 (skin + eye burns), H318 (serious eye damage), H290 (metals).
  • Two are health hazards (skin, eye); one is a physical hazard (metals) — same pictogram.
  • Milder skin/eye irritation (Category 2) uses the exclamation mark (GHS07) instead.

In plain English

The “this eats things” symbol. It flags chemicals that chemically burn skin, cause permanent eye damage, or destroy metal — strong acids and bases being the classic examples.

What the source says, in summary

H314: Causes severe skin burns and eye damage. H318: Causes serious eye damage. H290: May be corrosive to metals.
OSHA HCS — hazard statements (App C)Summarized, not quoted: read the source for its operative wording.

In context

A classification or labeling concept from the UN Globally Harmonized System, adopted into US law through OSHA's Hazard Communication Standard (29 CFR 1910.1200) and its appendices.

29 CFR 1910.1200

Where this is written in OSHA's rules

Example

Concentrated sodium hydroxide carries the corrosion pictogram (GHS05) with H314, “Causes severe skin burns and eye damage.” Concentrated hydrochloric acid carries the same pictogram, but for the metal-corrosion hazard it also invokes H290, “May be corrosive to metals.”

Why it matters

GHS05 drives the PPE (gloves, face/eye protection) and the packaging choice, because the chemical can burn a worker or eat through its own container. Treating a corrosive as a mere irritant, or omitting GHS05, understates a burn hazard and is a HazCom classification/labeling violation under 1910.1200.

One pictogram, three different “corrosion” hazards

GHS05 can mean skin corrosion (a health hazard, H314), serious eye damage (a health hazard, H318), or corrosive to metals (a physical hazard, H290). The pictogram is the same; the hazard statement tells you which — a chemical may have one, two, or all three.

The three hazards under the corrosion pictogram (GHS05)

HazardTypeH-code
Skin corrosion (Cat 1)HealthH314
Serious eye damage (Cat 1)HealthH318
Corrosive to metals (Cat 1)PhysicalH290

GHS05 (Corrosion): frequently asked questions

What does the corrosion pictogram mean?
It signals a substance that chemically destroys tissue or metal — skin corrosion (H314), serious eye damage (H318), or corrosive to metals (H290). Strong acids and bases are typical.
Does GHS05 always mean it will burn my skin?
Not necessarily. GHS05 can be assigned solely for serious eye damage or for being corrosive to metals. Check the hazard statement — H314 means skin (and eye) burns, H318 means eye damage, H290 means metal corrosion.
What pictogram is used for mild irritation?
The exclamation-mark pictogram (GHS07), not the corrosion pictogram. Skin/eye irritation (Category 2) is reversible and uses GHS07; corrosion and serious eye damage (Category 1) use GHS05.

Related terms

Free tools for this

Governing OSHA standards

More GHS terms

Acute Toxicity

A GHS health-hazard class for the harmful effects that follow a single dose, several doses within 24 hours, or a 4-hour inhalation exposure. Chemicals are sorted into categories by route (oral, dermal, inhalation) using LD50/LC50 cut-offs — Category 1 is the most toxic. OSHA's HazCom standard uses Categories 1–4.

Aspiration Hazard

A GHS health-hazard class for chemicals that can be fatal if swallowed and then enter the airways — directly or by vomiting — causing chemical pneumonia or lung injury. Thin, low-viscosity hydrocarbons (gasoline, kerosene, lamp oil) are the classic example. It is Category 1, with the health-hazard pictogram (GHS08) and signal word “Danger.”

Carcinogenicity

A GHS health-hazard class for chemicals that cause cancer or increase its incidence. GHS (and OSHA's HazCom standard) sorts carcinogens into Category 1A (known human carcinogen), 1B (presumed, from animal evidence), and Category 2 (suspected). Carcinogens carry the health-hazard pictogram (GHS08) and a hazard statement such as H350 (“May cause cancer”).

Chemicals Under Pressure

A physical-hazard class added by OSHA's 2024 HCS update (aligning with GHS Revision 7) for liquids or solids pressurized with a gas, held in pressure receptacles other than aerosol dispensers and not classified as gases under pressure. It is categorized by the flammability of its contents and always carries the gas-cylinder pictogram (GHS04) for the pressure hazard.

Classification

The process of evaluating the available scientific evidence for a chemical against the GHS criteria to decide whether it is hazardous and, if so, the hazard class and category of each effect. Classification is the first step in HazCom — its result determines every label element (pictogram, signal word, hazard and precautionary statements) and SDS content.

Corrosive to Metals

A GHS physical-hazard class for chemicals that, by chemical action, will materially damage or even destroy metals. It is a single category (Category 1), determined by corrosion-rate testing on steel and aluminum, and uses the corrosion pictogram (GHS05) with the hazard statement H290. It is a separate hazard from skin corrosion, even though both use GHS05.

Desensitized Explosives

A physical-hazard class added by OSHA's 2024 HCS update (GHS Revision 7) for solid or liquid explosives that have been phlegmatized — wetted or diluted — to suppress their explosive properties for safe transport and storage. It has four categories based on the corrected burning rate, and uses the flame pictogram (GHS02), not the exploding-bomb.

Globally Harmonized System (GHS)

An internationally agreed framework created by the United Nations (first adopted in 2003) that standardizes how chemical hazards are classified and communicated — using common hazard classes, pictograms, signal words (Danger / Warning), and coded hazard (H) and precautionary (P) statements on labels and safety data sheets. The US adopted GHS into law through OSHA's 2012 Hazard Communication Standard update.

Sources & verification

Reviewed by HazComFast against eCFR, OSHA.gov, NIOSH, and the Federal Register. Last reviewed 2026-10-05. This glossary is general information, not legal advice; OSHA State-Plan states (e.g. California, Michigan) may adopt stricter requirements.

Put GHS05 (Corrosion) into practice

Don't just read the definition — apply it. Use the free GHS Label Generator to put real numbers behind GHS05 (Corrosion) for your jobsite.

Get the Binder in Order Before the Inspector Arrives. Are You Ready?

OSHA does not give advance notice of inspections (29 CFR 1903.6). Get the binder in order before the opening conference, not during it.

Serious Violation

$16,550

per violation (max)

HazComFast Pro

$199/mo

10 jobsites, unlimited chemicals, unlimited workers

New sign-ups are paused. The free tools below need no account, and customers can log in as usual.

Your account keeps working as usual. Cancel anytime.