OSHA term · Glossary
Programmed Inspection
An OSHA inspection selected in advance using objective criteria — high injury/illness rates, a National or Local Emphasis Program, or neutral scheduling plans — rather than being triggered by a specific event or complaint. Programmed inspections are the lowest of OSHA's four inspection priorities, coming after imminent danger, fatalities/catastrophes, and complaints/referrals.
Also known as: planned inspection, scheduled inspection
On this page
Programmed Inspection at a glance
- Selected by objective criteria — injury rates, emphasis programs, neutral scheduling.
- Not triggered by a complaint, referral, fatality, or imminent-danger report.
- The 4th (lowest) OSHA inspection priority.
- National/Local Emphasis Programs (e.g., silica, heat) drive many programmed inspections.
In plain English
An inspection OSHA plans ahead of time by targeting risky industries — not because someone complained or got hurt at your site, but because your type of work (or your injury numbers) put you on a list.
What the source says, in summary
Programmed inspections are aimed at specific high-hazard industries or occupations, and are conducted according to objective selection criteria; they follow imminent danger, fatality/catastrophe, and complaint/referral inspections in OSHA's order of priority.
In context
An enforcement, recordkeeping, or general-duty concept under the Occupational Safety and Health Act and 29 CFR. These terms define how OSHA inspects, cites, and penalizes employers.
Example
A roofing contractor with no complaints against it is still inspected because it's in a high-hazard industry targeted by OSHA's fall-protection emphasis program — a programmed inspection driven by objective targeting, not by any specific incident at the company.
Why it matters
Programmed inspections mean you can be inspected even with a clean complaint record — simply for being in a targeted industry. Knowing which emphasis programs (silica, heat, falls, amputations) cover your work tells you where OSHA is proactively looking and where to be audit-ready.
Programmed vs. unprogrammed (event-driven) inspections
Unprogrammed inspections respond to a specific trigger — imminent danger, a fatality/catastrophe, or a complaint/referral. Programmed inspections are planned in advance by objective criteria. The two are handled differently, and the opening conference states which type you're facing.
OSHA inspection priorities (highest to lowest)
| Priority | Trigger |
|---|---|
| 1. Imminent danger | Hazard likely to cause death/serious harm immediately |
| 2. Fatality / catastrophe | A death or severe/multiple hospitalizations |
| 3. Complaints / referrals | Worker complaint or referral of a hazard |
| 4. Programmed | Objective targeting (emphasis programs, injury rates) |
Programmed Inspection: frequently asked questions
- What is a programmed OSHA inspection?
- An inspection planned in advance using objective criteria — high injury rates, an emphasis program, or neutral scheduling — rather than triggered by a complaint or event. It's the lowest of OSHA's four inspection priorities.
- How does OSHA decide who gets a programmed inspection?
- Through objective, neutral criteria: National and Local Emphasis Programs targeting specific hazards (silica, heat, falls), establishment injury/illness data, and scheduling plans — not by singling out an individual employer.
- What are OSHA's inspection priorities?
- In order: imminent danger, fatalities/catastrophes, complaints and referrals, and then programmed (planned) inspections. Higher-priority situations are addressed first.
Related terms
Free tools for this
More OSHA terms
The action an employer takes to fix a cited violation or eliminate a hazard OSHA identified during an inspection. The citation sets an abatement date, the deadline to correct the hazard, and within 10 calendar days after that date the employer must certify to OSHA that the violation was abated. Failure to abate accrues additional penalties of up to $16,550 per day.
Area DirectorThe senior OSHA official in charge of a specific OSHA Area Office — the local unit that runs inspections and enforcement in its geographic territory. The Area Director has the authority to issue citations, propose penalties, hold informal conferences with employers, and approve settlement agreements. When a Compliance Safety and Health Officer (CSHO) completes an inspection, it's the Area Director who ultimately issues the citation.
Bureau of Labor Statistics (BLS)The federal statistical agency within the U.S. Department of Labor that collects, analyzes, and publishes data on workplace injuries, illnesses, and fatalities. BLS conducts the annual Survey of Occupational Injuries and Illnesses (SOII) — compiled from employer OSHA 300 logs — and the Census of Fatal Occupational Injuries (CFOI). SOII data drives OSHA's Site-Specific Targeting (SST) program: establishments whose DART rates significantly exceed their BLS industry average are placed on the SST inspection list.
Competent PersonUnder OSHA's construction standards, a person who is capable of identifying existing and predictable hazards in the surroundings or working conditions, and who has the authorization to take prompt corrective measures to eliminate them. The role requires both knowledge and the authority to act, and is mandated by name in many specific standards — excavations, scaffolds, fall protection, asbestos, and more.
CitationThe formal written notice OSHA issues to an employer after an inspection, describing each alleged violation, the standard cited, the proposed penalty, and the date by which the hazard must be corrected (abated). OSHA must issue a citation with reasonable promptness and no later than six months after the violation occurred.
Closing ConferenceThe meeting at the end of an OSHA inspection where the compliance officer confers with the employer and informally advises them of any apparent violations found. Importantly, the closing conference discusses what was observed and the employer's rights — but it does NOT state final citations or penalties, which come later in the written Citation and Notification of Penalty.
Compliance Officer (CSHO)An OSHA Compliance Safety and Health Officer — the inspector who conducts workplace inspections. A CSHO presents credentials (a photo ID and a serial number), holds the opening conference, performs the walkaround, collects evidence, interviews employees, and recommends citations. CSHOs are either safety specialists or industrial hygienists.
ContestAn employer's formal challenge to an OSHA citation, penalty, or abatement date. To contest, the employer must file a written Notice of Contest with the OSHA Area Director within 15 working days of receiving the Citation and Notification of Penalty. Filing sends the case to the independent Occupational Safety and Health Review Commission (OSHRC); missing the deadline makes the citation a final, un-appealable order.
Sources & verification
Reviewed by HazComFast against eCFR, OSHA.gov, NIOSH, and the Federal Register. Last reviewed 2026-10-05. This glossary is general information, not legal advice; OSHA State-Plan states (e.g. California, Michigan) may adopt stricter requirements.
Put Programmed Inspection into practice
Don't just read the definition — apply it. Use the free HazCom Audit Checklist (2026) to put real numbers behind Programmed Inspection for your jobsite.
Get the Binder in Order Before the Inspector Arrives. Are You Ready?
OSHA does not give advance notice of inspections (29 CFR 1903.6). Get the binder in order before the opening conference, not during it.
Serious Violation
$16,550
per violation (max)
HazComFast Pro
$199/mo
10 jobsites, unlimited chemicals, unlimited workers
New sign-ups are paused. The free tools below need no account, and customers can log in as usual.
Your account keeps working as usual. Cancel anytime.