OSHA term · Glossary
Fire Prevention Plan
Verified vs OSHA sources · 2026-10-05
A plan required by 29 CFR 1910.39 that focuses on preventing fires — by identifying major fire hazards, controlling their fuels and ignition sources, and maintaining fire-related equipment. It must be in writing and available to employees (an employer with 10 or fewer employees may communicate it orally). Where OSHA requires one, it typically accompanies an Emergency Action Plan, which covers what to do once a fire or emergency occurs.
Also known as: FPP, fire prevention program
On this page
Fire Prevention Plan at a glance
- Five required elements (1910.39(c)): major fire hazards + handling/storage + ignition control + fire equipment; combustible-waste control; heat-producing equipment maintenance; the employees responsible for equipment that controls ignition sources; and the employees responsible for fuel-source hazards.
- Written and available to employees; ≤ 10 employees may communicate it orally.
- Employers must inform employees of the fire hazards of the materials and processes they're exposed to.
- Prevention-focused — the counterpart to the response-focused Emergency Action Plan.
In plain English
The plan for keeping fires from starting in the first place — knowing your fire hazards, keeping combustible trash under control, and maintaining the equipment that could spark a fire. It's the prevention side; the Emergency Action Plan is the response side.
What the rule says
“A fire prevention plan must include: (1) A list of all major fire hazards, proper handling and storage procedures for hazardous materials, potential ignition sources and their control, and the type of fire protection equipment necessary to control each major hazard;”
In context
An enforcement, recordkeeping, or general-duty concept under the Occupational Safety and Health Act and 29 CFR. These terms define how OSHA inspects, cites, and penalizes employers.
Where this is written in OSHA's rules
- 29 CFR 1910.39Read on eCFR / OSHA.gov
- 29 CFR 1910.39(c)(1)Read on eCFR / OSHA.gov
Example
A woodworking shop's FPP lists sawdust and finishes as major fire hazards, sets a schedule to empty dust collectors and remove oily rags (combustible waste), assigns maintenance of the dust-collection and heating equipment, and names the plant manager as responsible — the elements 1910.39(c) requires.
Why it matters
Most workplace fires are preventable, and the FPP forces an employer to actually map its fuels and ignition sources before they meet. Combined with combustible-dust and flammable-liquid controls, it targets the conditions behind the most destructive workplace fires — turning “hope it doesn't happen” into a maintained set of controls.
Fire Prevention Plan vs. Emergency Action Plan
The FPP (1910.39) prevents fires — controlling combustible waste, ignition sources, and equipment. The EAP (1910.38) responds to fires and other emergencies — alarms, evacuation, accountability. They're complementary and often required together, but the FPP is about stopping the fire from starting, not getting people out once it has.
The five required FPP elements (1910.39(c))
| # | Element |
|---|---|
| 1 | Major fire hazards, handling/storage, ignition control, fire equipment |
| 2 | Procedures to control combustible & flammable waste |
| 3 | Maintenance of safeguards on heat-producing equipment |
| 4 | Name or job title of employees responsible for maintaining equipment to prevent or control sources of ignition or fires |
| 5 | Name or job title of employees responsible for the control of fuel source hazards |
Fire Prevention Plan: frequently asked questions
- What is a Fire Prevention Plan?
- A plan required by 1910.39 focused on preventing fires — listing major fire hazards, controlling ignition sources and combustible waste, and maintaining fire-related equipment. It must be written and available (oral allowed for 10 or fewer employees).
- What must a Fire Prevention Plan include?
- Five elements: major fire hazards with handling/storage and ignition control and fire equipment; procedures to control combustible waste; maintenance of safeguards on heat-producing equipment; the name or job title of the employees responsible for maintaining equipment to prevent or control sources of ignition or fires (c)(4); and the name or job title of the employees responsible for the control of fuel source hazards (c)(5).
- Is a Fire Prevention Plan the same as an Emergency Action Plan?
- No. The Fire Prevention Plan prevents fires; the Emergency Action Plan governs the response (evacuation and accountability). Standards that require one often require the other too.
Related terms
Free tools for this
More OSHA terms
The action an employer takes to fix a cited violation or eliminate a hazard OSHA identified during an inspection. The citation sets an abatement date, the deadline to correct the hazard, and within 10 calendar days after that date the employer must certify to OSHA that the violation was abated. Failure to abate accrues additional penalties of up to $16,550 per day.
Area DirectorThe senior OSHA official in charge of a specific OSHA Area Office — the local unit that runs inspections and enforcement in its geographic territory. The Area Director has the authority to issue citations, propose penalties, hold informal conferences with employers, and approve settlement agreements. When a Compliance Safety and Health Officer (CSHO) completes an inspection, it's the Area Director who ultimately issues the citation.
Bureau of Labor Statistics (BLS)The federal statistical agency within the U.S. Department of Labor that collects, analyzes, and publishes data on workplace injuries, illnesses, and fatalities. BLS conducts the annual Survey of Occupational Injuries and Illnesses (SOII) — compiled from employer OSHA 300 logs — and the Census of Fatal Occupational Injuries (CFOI). SOII data drives OSHA's Site-Specific Targeting (SST) program: establishments whose DART rates significantly exceed their BLS industry average are placed on the SST inspection list.
Competent PersonUnder OSHA's construction standards, a person who is capable of identifying existing and predictable hazards in the surroundings or working conditions, and who has the authorization to take prompt corrective measures to eliminate them. The role requires both knowledge and the authority to act, and is mandated by name in many specific standards — excavations, scaffolds, fall protection, asbestos, and more.
CitationThe formal written notice OSHA issues to an employer after an inspection, describing each alleged violation, the standard cited, the proposed penalty, and the date by which the hazard must be corrected (abated). OSHA must issue a citation with reasonable promptness and no later than six months after the violation occurred.
Closing ConferenceThe meeting at the end of an OSHA inspection where the compliance officer confers with the employer and informally advises them of any apparent violations found. Importantly, the closing conference discusses what was observed and the employer's rights — but it does NOT state final citations or penalties, which come later in the written Citation and Notification of Penalty.
Compliance Officer (CSHO)An OSHA Compliance Safety and Health Officer — the inspector who conducts workplace inspections. A CSHO presents credentials (a photo ID and a serial number), holds the opening conference, performs the walkaround, collects evidence, interviews employees, and recommends citations. CSHOs are either safety specialists or industrial hygienists.
ContestAn employer's formal challenge to an OSHA citation, penalty, or abatement date. To contest, the employer must file a written Notice of Contest with the OSHA Area Director within 15 working days of receiving the Citation and Notification of Penalty. Filing sends the case to the independent Occupational Safety and Health Review Commission (OSHRC); missing the deadline makes the citation a final, un-appealable order.
Sources & verification
- 29 CFR 1910.39 (eCFR / OSHA.gov)
- 29 CFR 1910.39(c)(1) (eCFR / OSHA.gov)
- OSHA — 1910.39 (Fire Prevention Plans)
- OSHA — Fire Safety (Safety and Health Topics)
Reviewed by HazComFast against eCFR, OSHA.gov, NIOSH, and the Federal Register. Last reviewed 2026-10-05. This glossary is general information, not legal advice; OSHA State-Plan states (e.g. California, Michigan) may adopt stricter requirements.
Put Fire Prevention Plan into practice
Don't just read the definition — apply it. Use the free HazCom Audit Checklist (2026) to put real numbers behind Fire Prevention Plan for your jobsite.
Get the Binder in Order Before the Inspector Arrives. Are You Ready?
OSHA does not give advance notice of inspections (29 CFR 1903.6). Get the binder in order before the opening conference, not during it.
Serious Violation
$16,550
per violation (max)
HazComFast Pro
$199/mo
10 jobsites, unlimited chemicals, unlimited workers
New sign-ups are paused. The free tools below need no account, and customers can log in as usual.
Your account keeps working as usual. Cancel anytime.