Skip to content

Urgent: Nov 20, 2026 — HCS 2024 Deadline. Get ready →

Attention, health and reportingAbout 5 minutesGeneral Duty Clause · task rules such as 1926.1204(f)

Lone Worker Safety Toolbox Talk

A short talk for anyone who works alone or out of sight: whether the task can be done alone at all, who knows where you are, how and when you check in, what happens when a check-in is missed, and what a check-in system cannot do. Federal OSHA has no general standard for working alone, and some tasks have rules that call for an attendant or another person.

All safety topics

At a glance

  • No general federal standard on working alone. Task rules apply, such as the permit space attendant (29 CFR 1926.1204(f); 29 CFR 1910.146(d)(6)) or accounting for lone shipyard workers (29 CFR 1915.84).
  • About 5 minutes to read the script out loud, then the three questions. The drill and the tables below add time if you use them.
  • Free PDF and Word file: the script, the questions, the rule and a 20-line sign-in sheet. No account, no email.

Read this to your crew

Today is working alone. Some of us check a building at night, drive to a remote site, or finish a job after the crew has left. Alone means that if something goes wrong, nobody sees it happen.

The first question is whether the task can be done alone at all. Some cannot: entering a confined space that needs an entry permit takes an attendant outside, and other tasks have their own rules or a plan that calls for a second person. Those wait.

Before you go, someone knows where you are going, what you are doing, how to reach you and when you will check in. Test the phone or the radio where you will work, not in the parking lot. If there is no signal there, the plan changes before you start.

Check in when the plan says. If you are late, the person monitoring calls you. If there is no answer by the time the plan sets, they follow the escalation: call again, call the supervisor, send someone trained and equipped for that place, or call 911. Nobody untrained goes into a space that may have hurt you.

If the task, the place or the timing changes, tell your contact before you start the new work. At the end, check out. A missed check-out is handled like a missed check-in.

A phone or an app helps someone know you are in trouble. It does not make a dangerous task safe to do alone, and help still has to travel to you.

Three questions for the crew

  1. Which task today will someone do alone, and can it be done alone at all?
    Listen for: A named task, and a yes only if no rule or plan calls for an attendant or a second person.
  2. Who is your contact, when do you check in, and how?
    Listen for: A name, check-in times from the plan, and a method tested where the work is.
  3. What happens if you miss a check-in?
    Listen for: The contact calls, then escalates as the plan sets: the supervisor, a trained responder or 911. Nobody untrained goes into a hazard.

Are there OSHA rules for working alone?

Federal OSHA has no general standard for working alone and sets no general check-in interval. Each employer furnishes employment and a place of employment free from recognized hazards that are causing or are likely to cause death or serious physical harm (29 U.S.C. 654(a)(1)).

Some tasks have their own rules. For permit-required confined space entry, the employer provides at least one attendant outside the permit space for the duration of entry operations (29 CFR 1926.1204(f) in construction; 29 CFR 1910.146(d)(6) in general industry).

In shipyard employment, the employer shall account for each employee working alone throughout each workshift at regular intervals appropriate to the job assignment, and at the end of the job assignment or workshift, by sight or verbal communication (29 CFR 1915.84(a) and (b)). That rule is specific to shipyards; it shows the kind of accounting a check-in plan provides.

The paragraphs, word for word:

“(a) Except as provided in § 1915.51(c)(3) of this part, whenever an employee is working alone, such as in a confined space or isolated location, the employer shall account for each employee: (1) Throughout each workshift at regular intervals appropriate to the job assignment to ensure the employee's safety and health; and (2) At the end of the job assignment or at the end of the workshift, whichever occurs first.”

29 CFR 1915.84(a)

Before a lone assignment

ItemWhat the plan says
The taskAllowed alone, with no rule or plan calling for an attendant or a second person
The placeAddress or location, and the route a responder would use
The contactName and number of the person monitoring
Check-in timesSet from the hazards and how fast help can arrive; no national interval applies
CommunicationPhone, radio or device tested at the work location
Missed check-inWho calls, after how long, who is called next, who is sent, and when 911 is called
ChangesThe contact is told before the task, the place or the timing changes
Check-outCalled in at the end; a missed check-out is handled like a missed check-in

The employer's assessment of the task sets the check-in times and the escalation.

Drill: a missed check-in

About five minutes, as a tabletop exercise with a real lone assignment from this week.

  1. Pick a real lone assignment and read its plan: place, contact, check-in times.
  2. The contact plays a missed check-in and walks through each step of the escalation, with names and times.
  3. Name who is trained and equipped to go to that location, and what they would bring.
  4. Check that the address or location given to 911 would get a responder to the right place.
  5. Agree on one fix if a step was unclear.

Inside HazComFast

Give the lone worker talk, keep every signature

Print this talk for the morning meeting. In HazComFast, the crew signs the toolbox talk on a phone, in English or Spanish, and the record stays with each worker.

  • Signed where the signal isn't

    In a basement or a dead zone, the crew can still sign the toolbox talk in Chrome on Android or on a computer. The sign-ins go out once the app is open with a signal again, and each one lands once.
  • Sheets and certificates in Spanish

    Toolbox talk PDFs and training certificates print in Spanish, and compliance reports come out in English, Spanish or both side by side.
  • Thirty hires on a Monday morning

    Import a spreadsheet, see line by line who was created and who wasn't, and print one sheet of QR badges for the morning toolbox talk. Email is optional.
  • Records that stay when a worker leaves

    When a worker leaves, their training records and competent person designation stay on file. The account can't take them along.

New sign-ups are paused · the free tools need no account

Questions about this talk

Does OSHA set a check-in interval for lone workers?

No general federal interval exists. In shipyard employment, the employer accounts for each lone employee at regular intervals appropriate to the job assignment (29 CFR 1915.84(a)); elsewhere, the employer's assessment sets the interval.

Which tasks should never be done alone?

Those a rule or the plan reserves for more than one person, such as permit-required confined space entry, which takes at least one attendant outside the space (29 CFR 1926.1204(f); 29 CFR 1910.146(d)(6)).

Is a lone worker app enough?

An app or a device helps someone know you need help. It does not make a hazardous task acceptable to do alone, and it works only where it has a signal and someone is monitoring it.

What should happen after a missed check-in?

The escalation the plan sets: call again, call the supervisor, send someone trained and equipped for the location, or call 911, without sending an untrained coworker into a hazard.

Does OSHA require toolbox talks?

No rule requires a talk by that name. Construction employers must instruct each employee in the recognition and avoidance of unsafe conditions (29 CFR 1926.21(b)(2)), and many standards carry their own training duty; a toolbox talk is a common way to deliver part of it.

Do we need a sign-in sheet for a toolbox talk?

No general OSHA rule requires attendance records for a toolbox talk. Some standards require written certification of training, such as fall protection (29 CFR 1926.503(b)(1)) and forklift operators (29 CFR 1910.178(l)(6)). A signed sheet shows who attended; keep the topic, the date, the presenter and the language with it. It does not show that the content was understood.

Go further

More talks on attention, health and reporting

Sources

In a State Plan state, the state's own standard applies, and it can be stricter than the federal rule. Not legal advice.

All safety topics 100 safety topics Safety tip of the day