Skip to content

Urgent: Nov 20, 2026 — HCS 2024 Deadline. Get ready →

Attention, health and reportingAbout 5 minutesOSHA recommended practices · 29 CFR 1977.12

Stop Work Authority Toolbox Talk

A short talk on stopping work: how to recognize a condition that is not under control, how to call a stop without putting anyone in danger, who makes it safe, and who decides the restart under the employer's procedure. OSHA's recommended practices encourage employers to let all workers initiate or request a temporary suspension or shutdown of work they believe is unsafe.

All safety topics

At a glance

  • No OSHA standard creates a program called stop work authority. OSHA's recommended practices on worker participation; protection for refusing dangerous work under the conditions of 29 CFR 1977.12(b)(2).
  • About 5 minutes to read the script out loud, then the three questions. The drill and the tables below add time if you use them.
  • Free PDF and Word file: the script, the questions, the rule and a 20-line sign-in sheet. No account, no email.

Read this to your crew

Today is stopping work. OSHA's recommended practices encourage employers to let every worker initiate or request a temporary stop of work they believe is unsafe. Under our procedure, if you see something that is not under control, such as a guard off a machine, a trench wall cracking, a load swinging over people, or a smell nobody can explain, you call a stop.

Call it safely. Warn the people in danger first, in plain words: stop, the load is over people. Get yourself and others out of the way. Do not run into danger to shut something off, and do not grab controls you are not trained on. Use an emergency stop only if you are trained on it and can reach it safely.

Then tell the person in charge what you saw, where, and who could be hurt. Mark or block off the area if you can do it safely.

The fix belongs to the people responsible and trained for it: the competent person for a trench, the authorized employee for a lockout, the operator for a crane. Your job is to report it and stay clear.

Work restarts when the person with that authority under our procedure says so, after the problem is fixed and everyone affected has been told what changed. Nobody restarts a stopped job on their own.

If you think the fix did not work, say so again.

Three questions for the crew

  1. What would make you call a stop on this job today?
    Listen for: Specific conditions: a missing guard, a cracking trench wall, a load over people, an unknown smell or leak, a change the plan did not cover.
  2. How do you call a stop without creating a new hazard?
    Listen for: Warn the people at risk, get clear, tell the person in charge, and leave the controls to the people trained on them.
  3. Who decides when the work restarts?
    Listen for: The person with that authority under the site's procedure, once the problem is fixed and the crew has been told what changed.

What does OSHA say about stopping work?

No OSHA standard creates a program called stop work authority. OSHA's recommended practices for safety and health programs encourage employers to let all workers initiate or request a temporary suspension or shutdown of any work activity or operation they believe to be unsafe.

Separately, the law protects an employee who refuses a dangerous task only under specific conditions: the employee, with no reasonable alternative, refuses in good faith; a reasonable person would conclude there is a real danger of death or serious injury; there is not enough time to eliminate the danger through regular enforcement channels; and, where possible, the employee has asked the employer to correct the condition (29 CFR 1977.12(b)(2)). A company stop work procedure can cover much more than that.

Some standards say who acts on a hazard. In an excavation, where the competent person finds evidence of a possible cave-in or other hazardous conditions, exposed employees shall be removed from the hazardous area until the necessary precautions have been taken (29 CFR 1926.651(k)(2)).

The paragraphs, word for word:

“(2) However, occasions might arise when an employee is confronted with a choice between not performing assigned tasks or subjecting himself to serious injury or death arising from a hazardous condition at the workplace. If the employee, with no reasonable alternative, refuses in good faith to expose himself to the dangerous condition, he would be protected against subsequent discrimination. The condition causing the employee's apprehension of death or injury must be of such a nature that a reasonable person, under the circumstances then confronting the employee, would conclude that there is a real danger of death or serious injury and that there is insufficient time, due to the urgency of the situation, to eliminate the danger through resort to regular statutory enforcement channels. In addition, in such circumstances, the employee, where possible, must also have sought from his employer, and been unable to obtain, a correction of the dangerous condition.”

29 CFR 1977.12(b)(2)

“(2) Where the competent person finds evidence of a situation that could result in a possible cave-in, indications of failure of protective systems, hazardous atmospheres, or other hazardous conditions, exposed employees shall be removed from the hazardous area until the necessary precautions have been taken to ensure their safety.”

29 CFR 1926.651(k)(2)

Who does what in a stop

StepWhoWhat happens
See itAnyone on siteA condition that is not under control, or a change the plan did not cover
Stop it safelyThe person who sees itWarn the people at risk, get clear, use an emergency stop only if trained and safe
Report itThe person who sees itTell the person in charge what, where and who could be hurt
Make it safeThe person responsible and trained for itThe competent person, the authorized employee or the operator fixes or isolates it
RestartThe person with restart authority under the site's procedureChecks the fix, tells the crew what changed, restarts the work
Follow upThe supervisorRecords the stop and the fix, and tells the person who called it what was done

The roles come from the employer's own stop work procedure. This talk does not replace it.

Drill: practice the words

About five minutes. Nothing is actually stopped during the drill.

  1. Pick three situations that could happen on this site today.
  2. Each person says the stop out loud, short and specific: Stop, the load is over people. Stop, the guard is off the saw. Stop, the trench wall is cracking.
  3. Ask who they tell next, and name that person for today.
  4. Ask who fixes each situation and who approves the restart. Listen for: the competent person, the authorized employee or the operator for the fix; the person named in the procedure for the restart.
  5. Close by naming where stops are recorded and how the person who called one hears about the fix.

Inside HazComFast

Give the stop work talk, keep every signature

Print this talk for the morning meeting. In HazComFast, the crew signs the toolbox talk on a phone, in English or Spanish, and the record stays with each worker.

  • Signed where the signal isn't

    In a basement or a dead zone, the crew can still sign the toolbox talk in Chrome on Android or on a computer. The sign-ins go out once the app is open with a signal again, and each one lands once.
  • Sheets and certificates in Spanish

    Toolbox talk PDFs and training certificates print in Spanish, and compliance reports come out in English, Spanish or both side by side.
  • Thirty hires on a Monday morning

    Import a spreadsheet, see line by line who was created and who wasn't, and print one sheet of QR badges for the morning toolbox talk. Email is optional.
  • Records that stay when a worker leaves

    When a worker leaves, their training records and competent person designation stay on file. The account can't take them along.

New sign-ups are paused · the free tools need no account

Questions about this talk

Is stop work authority an OSHA requirement?

No OSHA standard creates a program by that name. OSHA's recommended practices encourage employers to let all workers initiate or request a temporary suspension or shutdown of work they believe to be unsafe.

Can a worker refuse dangerous work?

Under specific conditions. A refusal is protected when the employee, with no reasonable alternative, refuses in good faith, a reasonable person would conclude there is a real danger of death or serious injury, there is not enough time to eliminate the danger through regular enforcement channels, and, where possible, the employee has asked the employer to correct it (29 CFR 1977.12(b)(2)). It is not a right to refuse any task.

Who restarts the work after a stop?

The person with that authority under the employer's procedure, after the problem is fixed and checked and the people affected have been told what changed. Where a standard gives a role to a competent or authorized person, that person acts first, as in an excavation (29 CFR 1926.651(k)(2)).

Where is the full stop work policy?

The stop work authority policy guide covers the roles, the escalation path, the restart checklist and the legal distinctions, with an editable toolkit.

Does OSHA require toolbox talks?

No rule requires a talk by that name. Construction employers must instruct each employee in the recognition and avoidance of unsafe conditions (29 CFR 1926.21(b)(2)), and many standards carry their own training duty; a toolbox talk is a common way to deliver part of it.

Do we need a sign-in sheet for a toolbox talk?

No general OSHA rule requires attendance records for a toolbox talk. Some standards require written certification of training, such as fall protection (29 CFR 1926.503(b)(1)) and forklift operators (29 CFR 1910.178(l)(6)). A signed sheet shows who attended; keep the topic, the date, the presenter and the language with it. It does not show that the content was understood.

Go further

More talks on attention, health and reporting

Sources

In a State Plan state, the state's own standard applies, and it can be stricter than the federal rule. Not legal advice.

All safety topics 100 safety topics Safety tip of the day