Skip to content

Urgent: Nov 20, 2026 — HCS 2024 Deadline. Get ready →

December Safety Topics and Meeting Plan

The year-end rush, heaters and the holiday shutdown. Deadlines, holidays and cold: the season for shortcuts. Heaters and temporary power come out, and a site that closes for the holidays needs a safe shutdown and a checked restart. The plan below gives 4 meetings, one a week, and one optional meeting: each with its objective, a full toolbox talk, a safe activity, a question for the crew and what to check afterward.

At a glance

  • 5 meetings for December, each linked to a full toolbox talk with a PDF and a sign-in sheet.
  • A HazComFast proposal, not an OSHA calendar. Move the meetings to the weeks when the work happens.
  • The PDF and Word plan repeat the meetings and add a follow-up sheet for the actions raised.

December can pack deadlines, holidays and cold into a few weeks. January's plan starts from the route the crew walks in the morning; December's starts from the site as the crew leaves it: the heaters, the temporary power, the dark walkways, the last trips of the year, and the shutdown before the break.

Where December is mild, keep the shutdown and restart sessions and swap the heater session for one of the vehicle talks.

The December meetings

Meeting 1 · about 5 minutes

Heaters before the break

Objective
Every heater has the fresh air it needs while it runs, and is turned off or checked before the site closes.
Activity
List every heater and generator on site, with the person who turns each one off, or checks it, before the break.
Ask the crew
Which heaters will run while the site is closed, if any, and who checks them?
Check afterward
Each heater has a named person, and none is left running without a plan.
Full talk: Carbon Monoxide

Meeting 2 · about 5 minutes

Temporary power

Objective
Cords and temporary power are checked, and what is not needed over the break is unplugged.
Activity
Walk the temporary power with the electrician: cords, GFCIs, panels, and what stays energized over the break.
Ask the crew
What stays powered while the site is closed, and why?
Check afterward
Cords not needed over the break are unplugged and stored.
Full talk: Extension Cords and GFCI

Meeting 3 · about 5 minutes

Dark walkways

Objective
Walkways and stairs are lit and clear of ice when the crew arrives and leaves in the dark.
Activity
Check the lighting on walkways and stairs at the hour the crew arrives or leaves.
Ask the crew
Which part of our route is dark when we arrive or leave?
Check afterward
Dark spots get lighting, or the crew uses another route.
Full talk: Slips, Trips and Falls

Meeting 4 · about 5 minutes

The last trips of the year

Objective
Trips between sites and home before the holidays are planned for weather and fatigue, with the phone down.
Activity
Plan the last trips of the year: who drives, when, and what happens if the roads are bad.
Ask the crew
If the roads are bad on the last day, who decides that the crew stays put?
Check afterward
Each trip plan names a driver and the person who decides in bad weather.
Full talk: Distracted Driving

Optional meeting · about 8 minutes

Closing the site and opening it again

Objective
The site is left safe for the break, and a named person checks it before work restarts.
Activity
Write the closing list with the crew: materials secured, openings covered, heaters and power handled, fuel stored. Name the person who walks the site before work restarts.
Ask the crew
Who walks the site before anyone starts work after the break?
Check afterward
The closing list is done, and the restart check is assigned to a named person.
Full talk: Jobsite Housekeeping

Before the first meeting

  • Set the closing date and the restart date.
  • Write the closing list with the crew.
  • Name the person who does the restart check.
  • List the heaters and the temporary power that stay on, if any.

Keep a record of each meeting with the free safety meeting sign-in sheet. A signature shows who was there, not what each person understood, so the check after each meeting matters as much as the signatures.

Other talks that fit December

The rest of the year

Each month has its own plan. The monthly safety topics page shows the whole year on one page, and the safety topics library has every toolbox talk by hazard, trade and season.

In a State Plan state, the state's own standard applies, and it can be stricter than the federal rule. Not legal advice.

Inside HazComFast

Run the December meetings, keep every signature

Print each talk for the meeting. In HazComFast, the crew signs the toolbox talk on a phone, in English or Spanish, and the record stays with each worker.

  • Signed where the signal isn't

    In a basement or a dead zone, the crew can still sign the toolbox talk in Chrome on Android or on a computer. The sign-ins go out once the app is open with a signal again, and each one lands once.
  • Sheets and certificates in Spanish

    Toolbox talk PDFs and training certificates print in Spanish, and compliance reports come out in English, Spanish or both side by side.
  • Thirty hires on a Monday morning

    Import a spreadsheet, see line by line who was created and who wasn't, and print one sheet of QR badges for the morning toolbox talk. Email is optional.
  • Records that stay when a worker leaves

    When a worker leaves, their training records and competent person designation stay on file. The account can't take them along.

New sign-ups are paused · the free tools need no account