OSHA term · Glossary
Qualified Person
Verified vs OSHA sources · 2026-10-05
In OSHA construction terms (29 CFR 1926.32(m)), a qualified person is someone who — by a recognized degree, certificate, or professional standing, or by extensive knowledge, training, and experience — has demonstrated the ability to solve or resolve problems relating to the subject matter, the work, or the project. The defining trait is expertise. It's distinct from a “competent person,” whose defining trait is the authority to identify hazards and take prompt corrective action.
Also known as: qualified (1926.32)
On this page
Qualified Person at a glance
- Defined by demonstrated expertise — via a degree/certificate/professional standing, or extensive knowledge, training, and experience.
- Focus: the ability to solve or resolve problems related to the work.
- Different from a competent person, who is defined by authority to identify and promptly correct hazards.
- Certain tasks specifically require a qualified person (e.g., designing components of a personal fall arrest system).
In plain English
The expert — someone whose degree, credential, or deep hands-on experience proves they can solve problems in a specific area (like engineering a fall-arrest anchor or designing a shoring system). Being qualified is about know-how, not about being handed authority to stop work.
What the rule says
“Qualified means one who, by possession of a recognized degree, certificate, or professional standing, or who by extensive knowledge, training, and experience, has successfully demonstrated his ability to solve or resolve problems relating to the subject matter, the work, or the project.”
In context
An enforcement, recordkeeping, or general-duty concept under the Occupational Safety and Health Act and 29 CFR. These terms define how OSHA inspects, cites, and penalizes employers.
Where this is written in OSHA's rules
- 29 CFR 1926.32(m)Read on eCFR / OSHA.gov
Example
Designing an engineered anchorage for a personal fall arrest system calls for a qualified person — an engineer whose credentials and experience prove they can solve that structural problem. Inspecting the daily excavation for cave-in hazards, by contrast, is the job of a competent person with authority to shut the trench down.
Why it matters
OSHA standards deliberately assign some tasks to a “qualified person” and others to a “competent person,” and they aren't interchangeable. Using the wrong one — say, having a competent person perform work the standard reserves for a qualified engineer — is both a safety gap and a citable error.
Qualified person vs. competent person
The two OSHA roles hinge on different traits. A qualified person has the expertise (degree, credential, or extensive experience) to solve technical problems. A competent person has the authority to identify hazards and take prompt corrective action — and doesn't necessarily hold a formal credential. Expertise vs. on-site authority: that's the dividing line.
Qualified person vs. competent person (1926.32)
| Attribute | Qualified person | Competent person |
|---|---|---|
| Defined by | Expertise (degree/credential or experience) | Authority to correct hazards |
| Core ability | Solve/resolve technical problems | Identify hazards & act promptly |
| Typical task | Design an engineered system | Daily hazard inspection with stop-work authority |
Qualified Person: frequently asked questions
- What is a qualified person under OSHA?
- Per 1926.32(m), someone who — by a recognized degree, certificate, or professional standing, or by extensive knowledge, training, and experience — has demonstrated the ability to solve or resolve problems relating to the work or project.
- What's the difference between a qualified and a competent person?
- A qualified person is defined by expertise (credentials or experience) to solve technical problems. A competent person is defined by the authority to identify hazards and take prompt corrective action. Expertise versus on-site authority.
- When is a qualified person required?
- For tasks OSHA reserves for demonstrated expertise — for example, designing components of a personal fall arrest system, or other engineering-type determinations a standard assigns to a “qualified person.”
Related terms
Free tools for this
More OSHA terms
The action an employer takes to fix a cited violation or eliminate a hazard OSHA identified during an inspection. The citation sets an abatement date, the deadline to correct the hazard, and within 10 calendar days after that date the employer must certify to OSHA that the violation was abated. Failure to abate accrues additional penalties of up to $16,550 per day.
Area DirectorThe senior OSHA official in charge of a specific OSHA Area Office — the local unit that runs inspections and enforcement in its geographic territory. The Area Director has the authority to issue citations, propose penalties, hold informal conferences with employers, and approve settlement agreements. When a Compliance Safety and Health Officer (CSHO) completes an inspection, it's the Area Director who ultimately issues the citation.
Bureau of Labor Statistics (BLS)The federal statistical agency within the U.S. Department of Labor that collects, analyzes, and publishes data on workplace injuries, illnesses, and fatalities. BLS conducts the annual Survey of Occupational Injuries and Illnesses (SOII) — compiled from employer OSHA 300 logs — and the Census of Fatal Occupational Injuries (CFOI). SOII data drives OSHA's Site-Specific Targeting (SST) program: establishments whose DART rates significantly exceed their BLS industry average are placed on the SST inspection list.
Competent PersonUnder OSHA's construction standards, a person who is capable of identifying existing and predictable hazards in the surroundings or working conditions, and who has the authorization to take prompt corrective measures to eliminate them. The role requires both knowledge and the authority to act, and is mandated by name in many specific standards — excavations, scaffolds, fall protection, asbestos, and more.
CitationThe formal written notice OSHA issues to an employer after an inspection, describing each alleged violation, the standard cited, the proposed penalty, and the date by which the hazard must be corrected (abated). OSHA must issue a citation with reasonable promptness and no later than six months after the violation occurred.
Closing ConferenceThe meeting at the end of an OSHA inspection where the compliance officer confers with the employer and informally advises them of any apparent violations found. Importantly, the closing conference discusses what was observed and the employer's rights — but it does NOT state final citations or penalties, which come later in the written Citation and Notification of Penalty.
Compliance Officer (CSHO)An OSHA Compliance Safety and Health Officer — the inspector who conducts workplace inspections. A CSHO presents credentials (a photo ID and a serial number), holds the opening conference, performs the walkaround, collects evidence, interviews employees, and recommends citations. CSHOs are either safety specialists or industrial hygienists.
ContestAn employer's formal challenge to an OSHA citation, penalty, or abatement date. To contest, the employer must file a written Notice of Contest with the OSHA Area Director within 15 working days of receiving the Citation and Notification of Penalty. Filing sends the case to the independent Occupational Safety and Health Review Commission (OSHRC); missing the deadline makes the citation a final, un-appealable order.
Sources & verification
- 29 CFR 1926.32(m) (eCFR / OSHA.gov)
- OSHA — 1926.32 (Definitions)
- OSHA — Construction eTool (Competent/Qualified Person)
Reviewed by HazComFast against eCFR, OSHA.gov, NIOSH, and the Federal Register. Last reviewed 2026-10-05. This glossary is general information, not legal advice; OSHA State-Plan states (e.g. California, Michigan) may adopt stricter requirements.
Put Qualified Person into practice
Don't just read the definition — apply it. Use the free HazCom Audit Checklist (2026) to put real numbers behind Qualified Person for your jobsite.
Get the Binder in Order Before the Inspector Arrives. Are You Ready?
OSHA does not give advance notice of inspections (29 CFR 1903.6). Get the binder in order before the opening conference, not during it.
Serious Violation
$16,550
per violation (max)
HazComFast Pro
$199/mo
10 jobsites, unlimited chemicals, unlimited workers
New sign-ups are paused. The free tools below need no account, and customers can log in as usual.
Your account keeps working as usual. Cancel anytime.