Solvents · CAS Database
Methanol
Methanol (CAS 67-56-1) — Industrial solvent and chemical feedstock. What OSHA's HazCom rules ask of it on a job site, and where its Safety Data Sheet comes from: your supplier.
Verified vs OSHA sources · October 19, 2026
CAS Registry Number CAS 67-56-1 · also known as Methyl alcohol, Wood alcohol
Overview
Industrial solvent and chemical feedstock
Get the SDS for your product
Methanol is a substance. What you hold is a product: a drum, jug or cylinder from a supplier, with its own formula and its own sheet. These are official sheets for methanol products from US suppliers, opened on Oct 21, 2026.
Methanol
Airgas
Number SDS 001065
Methanol
Savogran Company
Number Product 1430N
Methyl alcohol
Flinn Scientific
Number SDS 509
Each link opens the maker's or supplier's own copy. Match the product name, the number and the revision date with your container, and keep the current sheet for the exact product you hold. Other products: SDS Lookup.
What the sheet of a methanol product sets off
Each line is a condition on the sheet you hold, and it names the paragraph it rests on. The paragraphs were read in the eCFR on Oct 19, 2026. General industry follows 29 CFR part 1910 and construction follows part 1926.
If Section 2 lists a classification or a hazard not otherwise classified
Written program with its chemical list, training, sheet access each shift and workplace labels. (29 CFR 1910.1200(c), (e)(1), (f)(6), (g)(8), (h)(1); 1926.59)
If Section 2 lists a flammable liquid
Electrical connection of nozzle and container at dispensing, for Category 1 or 2 or Category 3 below 100 °F, in the industrial plants that paragraph (e)(1) describes (general industry). Construction names Category 1, 2 and 3 in its own paragraph. (29 CFR 1910.106(e)(1), (e)(6)(ii); 1926.152(e)(2))
If Section 8 calls for a respirator
The employer provides one when necessary to protect health and keeps a respiratory protection program. (29 CFR 1910.134(a)(2); 1926.103)
If Section 8 lists an OSHA exposure limit
The tables are in 1910.1000 and, in construction, Table 1 of 1926.55. (29 CFR 1910.1000; 1926.55)
If the product is a consumer product
Outside the standard when the employer shows use as its maker intended at no more than consumer exposure. Hours of use every shift can fall outside that. (29 CFR 1910.1200(b)(6)(ix))
A container you fill from the sheet carries a label built from Section 2 of that sheet. The secondary container label maker makes it from what you type in, in English and Spanish if you tick both, and fills in nothing from a list.
Methanol on the job site
Methanol shows up as a fuel (some heaters and small engines), an antifreeze and de-icer, a shellac and thinner solvent, and a component of some cleaners. Its 200 ppm PEL carries a skin notation for a reason: methanol is absorbed through intact skin as well as inhaled, and the body converts it to formic acid, which attacks the optic nerve — serious exposure can cause permanent blindness, and ingestion can be fatal. That systemic toxicity is easy to forget because it behaves like an ordinary, cheap solvent.
Treat it as more dangerous than its “alcohol” label suggests: ventilate, wear solvent-resistant gloves (not the everyday nitrile for prolonged contact), keep it off skin, and never siphon fuel or solvent by mouth. It is also a flammable liquid that burns with a nearly invisible flame in daylight, so a methanol fire can be underway before anyone sees it.
Key takeaways
- Methanol is absorbed through skin and metabolizes to a nerve toxin — serious exposure can blind; ingestion can kill.
- Ventilate, keep it off skin with suitable gloves, and never siphon by mouth.
- It's flammable with a nearly invisible daytime flame — a fire can spread unseen.
Field guidance for planning and training — not a substitute for the manufacturer Safety Data Sheet, which gives the exposure limits, PPE, and handling for your specific product.
OSHA Exposure Limits
OSHA permissible exposure limit (PEL) and secondary limit for Methanol on a US construction site. Where a substance-specific 1926 standard applies, its codified limit is shown; otherwise the figure comes from Table 1 to 29 CFR 1926.55, the construction air-contaminants table. Where Table 1 gives no figure, either the substance has its own standard (the row says "see 1926.xxxx" and this page names that standard) or Table 1 sets no limit for it. In both cases Section 8 of the Safety Data Sheet lists the limits other bodies recommend and the supplier's controls.
| Limit | Value | Basis / citation |
|---|---|---|
| OSHA PEL (8-hr TWA) | 200 ppm | 29 CFR 1910.1000 Table Z-1 |
| Action level | See SDS / standard | Not all substances define an action level |
| Averaging period | 8-hour TWA | Compare with ACGIH TLV / NIOSH REL — often more protective than the OSHA PEL |
This is the general-industry figure. Construction air contaminants are listed separately in Table 1 to 29 CFR 1926.55, and on 33 substances the two differ — sometimes by a wide margin. Where they differ, the construction value governs work on a jobsite.
Many OSHA PELs date to 1971 and may be less protective than current ACGIH/NIOSH values; always check Section 8 of the manufacturer SDS for the limits it lists, which can be lower than the PEL, and for its control guidance. Not legal advice.
GHS Classification
Physical Properties
OSHA & HazCom Compliance Requirements
For construction work, Hazard Communication is governed by 29 CFR 1926.59 (adopts 29 CFR 1910.1200). Employers who use Methanol must:
- •Maintain an accessible SDS for Methanol (readily accessible during each work shift, 29 CFR 1910.1200(g)(8))
- •Keep the supplier's label on shipped containers (29 CFR 1910.1200(f)(1)) and mark workplace containers with the shipped-label elements or the product identifier and hazard information (29 CFR 1910.1200(f)(6)); a portable container for immediate use by the person who filled it needs none (1910.1200(f)(8))
- •Include it in the workplace chemical inventory
- •Train employees on hazards before initial assignment
- •Retain employee exposure and medical records per 29 CFR 1910.1020 — 30-year retention applies to exposure/medical records, not to SDSs generically
HazCom (1910.1200 / construction 1926.59) covers hazard classification, labels, SDSs, the written program (with its chemical list and the rules for non-routine tasks and multi-employer sites) and training. It does not impose chemical storage segregation. Flammable & combustible liquid storage for construction is 29 CFR 1926.152; segregation of incompatibles is planned from SDS Sections 7 and 10. Not legal advice; state-plan states may have stricter rules.
Handling & Secondary-Container Labeling
When you transfer Methanol into a workplace (secondary) container, OSHA gives two compliant options under 29 CFR 1910.1200(f)(6):
- •(f)(6)(i): full GHS label elements (as on the shipped container)
- •(f)(6)(ii): product identifier + words/pictures/symbols (or combination) that provide AT LEAST general information on the hazards and, with the other information immediately available under the HazCom program, the specific hazards
There is no volume/size cutoff for secondary containers — the ≤100 ml / ≤3 ml accommodations (29 CFR 1910.1200(f)(12) (added by the HCS 2024 final rule)) apply only to the manufacturer's shipped container. A portable container filled for the immediate use of the worker who fills it needs no label (29 CFR 1910.1200(f)(8)).
GHS Hazard Classification under OSHA HCS
OSHA's Hazard Communication Standard adopts the GHS (primarily GHS Revision 7 (HCS 2024)). It requires 8 hazard pictograms (Appendix C, Figure C.1). The Environment pictogram (GHS09) is not required by OSHA — Not in App C; outside OSHA jurisdiction; voluntary.
The 8 OSHA-required pictograms:
For flammable liquids, OSHA classifies by flash point and boiling point (App B.6.1 / 1910.106(a)):
- •Category 1: FP < 73.4°F AND BP <= 95°F
- •Category 2: FP < 73.4°F AND BP > 95°F
- •Category 3: FP >= 73.4°F AND <= 140°F
- •Category 4: FP > 140°F AND <= 199.4°F
The specific GHS classification of Methanol comes from its Safety Data Sheet (Section 2). Use the live classification panel above and the manufacturer SDS to confirm pictograms and categories.
HCS 2024 Update Deadlines
Under the federal Hazard Communication Standard 2024 update (aligned primarily GHS Revision 7):
- •May 19, 2026 — manufacturers, importers, and distributors update substance labels & SDSs (1910.1200(j)(2)(i))
- •November 20, 2026 — employers, as necessary, update alternative workplace labels, the written program & training for newly identified hazards (1910.1200(j)(2)(ii))
During the interim, parties may comply with the 2012 HCS, the 2024 HCS, or both. These are the federal OSHA dates; State Plans adopt the update on their own schedules, so check your state.
Quick Actions
Put Methanol on your written inventory, print the workplace label your containers need, and keep your supplier’s sheet reachable on the jobsite.
The safety data sheet for your product comes from the supplier who sold it to you — no public registry can provide it. For the underlying chemistry, the public record is on PubChem.
Where this fits in your HazCom program
- SDS management — collecting the sheet, keeping it current, and making it readable during each work shift.
- GHS labels & workplace labeling — what has to appear on the shipped container, and what a secondary container needs instead.
Free Compliance Tools for Methanol
Related Solvents
Frequently Asked Questions
What is Methanol (CAS 67-56-1)?
Industrial solvent and chemical feedstock
What are the OSHA HazCom requirements for Methanol on a construction site?
For construction work, Hazard Communication is governed by 29 CFR 1926.59 (adopts 29 CFR 1910.1200). Where a product you use containing Methanol is a hazardous chemical under the standard (its supplier's label and SDS say so), you must keep its Safety Data Sheet accessible, keep the supplier's label on shipped containers and label workplace containers under (f)(6), list it in the written program's chemical inventory, and train workers on its hazards at initial assignment. Exemptions apply, such as a consumer product used the way a consumer would use it (1910.1200(b)(6)(ix)).
What is the OSHA permissible exposure limit (PEL) for Methanol?
OSHA's permissible exposure limit for Methanol is 200 ppm (8-hour TWA), per 29 CFR 1910.1000 Table Z-1. That figure is the GENERAL-INDUSTRY limit; construction air contaminants are listed separately at 29 CFR 1926.55 Table 1, and where the two differ the construction value governs work on a jobsite. The ACGIH TLV and the NIOSH REL are recommendations, not limits OSHA enforces on their own. Where one is lower than the PEL, many employers adopt it as their working limit. Confirm the limit for your specific task against Section 8 of the manufacturer Safety Data Sheet and any State rule that applies.
When does the updated HCS 2024 labeling apply to Methanol?
Under the federal Hazard Communication Standard 2024 update (aligned primarily GHS Revision 7), manufacturers, importers and distributors must comply by May 19, 2026 when Methanol is sold as a substance, and by November 19, 2027 for mixtures that contain it. Employers must, as necessary, update alternative workplace labels, the written program and training for newly identified hazards by November 20, 2026 for substances and May 19, 2028 for mixtures (29 CFR 1910.1200(j)). During the interim, parties may comply with the 2012 HCS, the 2024 HCS, or both. State Plans adopt the update on their own schedules, so check your state's dates.
How do I label a secondary (workplace) container of Methanol?
Under 29 CFR 1910.1200(f)(6) you have two options: (i) the label elements of (f)(1)(i) through (v): product identifier, signal word, hazard statements, pictograms and precautionary statements, with no supplier name or address needed, or (ii) the product identifier plus words, pictures, symbols, or a combination that provide at least general hazard information and that, with the other information immediately available to workers under the HazCom program, give the specific hazards. There is no volume/size cutoff for secondary containers. A portable container filled from a labeled container, kept under the control of the worker who fills it and used only by that worker within the same shift, does not require a label (29 CFR 1910.1200(f)(8)).
How long must SDS and exposure records for Methanol be kept?
Under 29 CFR 1910.1020, 30-year retention applies to employee exposure and medical records (medical records: duration of employment plus 30 years) — not to SDSs generically. Where an SDS is not retained, a record of the chemical's identity, where it was used, and when must be kept for at least 30 years.
Where can I find the SDS for Methanol?
Under 29 CFR 1910.1200(g)(6) and (g)(7), the manufacturer or importer of Methanol must ensure that distributors and employers receive its Safety Data Sheet with the initial shipment and with the first shipment after the sheet is updated, and a distributor passes it on in its commercial shipments the same way. Retail and wholesale distributors that sell to employers over the counter or to commercial accounts have their own duties in (g)(7)(iii) to (vii), such as providing the sheet on request. HazComFast keeps the sheets you collect in one inventory per jobsite, searchable by product, manufacturer or CAS number, and your jobsite's SDS load onto the phone on their own.
Sources & Primary References
Regulatory data on this page is sourced from HazComFast's verified regulatory module (29 CFR 1926.59 / 1910.1200 and substance-specific 1926 standards), last verified October 19, 2026 against eCFR, OSHA.gov, and the Federal Register. Physical-property data comes from PubChem. Confirm it against the manufacturer Safety Data Sheet. This page is informational and is not legal advice.
Get the Binder in Order Before the Inspector Arrives. Are You Ready?
OSHA inspections come unannounced, apart from the few exceptions listed in 29 CFR 1903.6. Get the binder in order before the opening conference, not during it.
Serious Violation
$16,550
per violation (max)
HazComFast Pro
$199/mo
10 jobsites, unlimited chemicals, unlimited workers
New sign-ups are paused. The free tools below need no account, and customers can log in as usual.
Your account keeps working as usual. Cancel anytime.