Skip to content

Urgent: Nov 20, 2026 — HCS 2024 Deadline. Get ready →

May Safety Topics and Meeting Plan

Falls. Roofing and steel season, and the month of OSHA's national fall prevention campaign. The plan below gives 4 meetings, one a week, and one optional meeting: each with its objective, a full toolbox talk, a safe activity, a question for the crew and what to check afterward.

At a glance

  • 5 meetings for May, each linked to a full toolbox talk with a PDF and a sign-in sheet.
  • A HazComFast proposal, not an OSHA calendar. Move the meetings to the weeks when the work happens.
  • The PDF and Word plan repeat the meetings and add a follow-up sheet for the actions raised.

May is roofing and steel season, and OSHA's National Safety Stand-Down to Prevent Falls in Construction has taken place in May. The month puts falls at the center: getting to height, working on roofs, things that fall, and the access ladders that link one level to the next.

Construction Safety Week falls in May too; its organizers list May 3 to 7 for the 2027 week. The Stand-Down and Safety Week kits turn this month into an event, and the weekly sessions work with or without one.

The May meetings

Meeting 1 · about 12 minutes

Getting to height

Objective
For each task at height, the crew names the protection: guardrail, safety net or personal fall arrest system.
Activity
Inspect a harness and lanyard together, and look at the anchor it will tie off to. Personal fall arrest systems are inspected before each use, and defective components are removed from service (29 CFR 1926.502(d)(21)).
Ask the crew
How far can you fall before the system stops you, and what is below?
Check afterward
Damaged fall protection equipment is out of service before the shift.
Full talk: Fall Protection Essentials

Meeting 2 · about 5 minutes

Roof work

Objective
Before anyone goes on the roof, the crew knows its edges, openings and skylights and how each is protected.
Activity
From the roof plan or at the access point, name each edge, opening and skylight and the protection for each.
Ask the crew
Which openings on this roof are covered, and how are the covers marked?
Check afterward
Covers are secured and marked, and edges have their protection before work starts.
Full talk: Roofing Safety

Meeting 3 · about 8 minutes

Ladders used for access

Objective
Ladders used to reach a roof or an upper level are set up and secured as the ladder talk shows.
Activity
Check the ladder used to reach today's upper level: how far it extends above the landing, its angle, and how it is secured.
Ask the crew
What do you carry up a ladder, and how?
Check afterward
Each access ladder is secured before anyone climbs it.
Full talk: Ladder Safety

Meeting 4 · about 5 minutes

Things that fall

Objective
Tools and materials at height are secured, and the area below is controlled.
Activity
Stand below today's work at height and name everything that could fall.
Ask the crew
Who can walk below the work today, and how do we keep them out?
Check afterward
The area below is barricaded or covered, or the tools up top are tethered.
Full talk: Dropped Objects

Optional meeting · about 12 minutes

Scaffolds

Objective
Scaffolds and scaffold components shall be inspected for visible defects by a competent person before each work shift (29 CFR 1926.451(f)(3)).
Activity
Look at today's scaffold with the competent person and at the record of the inspection, if the site keeps one.
Ask the crew
Who inspected this scaffold before the shift?
Check afterward
The scaffold was inspected before the shift, and defects found are fixed before use.
Full talk: Scaffolding Safety

Before the first meeting

  • If the crew holds a stand-down, pick the day, the time and the task at height it will look at.
  • Check harnesses, lanyards and anchors before the first meeting.
  • Plan how a fallen worker would be reached, and by whom.
  • Invite the subcontractors who work at height to the meetings.

Keep a record of each meeting with the free safety meeting sign-in sheet. A signature shows who was there, not what each person understood, so the check after each meeting matters as much as the signatures.

Campaigns and events in May

OSHA's National Safety Stand-Down to Prevent Falls in Construction has taken place in May; in 2026 it ran from May 4 to 8. OSHA publishes each year's dates on its site. Department of Labor news release on the 2026 Stand-Down

The rest of the year

Each month has its own plan. The monthly safety topics page shows the whole year on one page, and the safety topics library has every toolbox talk by hazard, trade and season.

Sources

In a State Plan state, the state's own standard applies, and it can be stricter than the federal rule. Not legal advice.

Inside HazComFast

Run the May meetings, keep every signature

Print each talk for the meeting. In HazComFast, the crew signs the toolbox talk on a phone, in English or Spanish, and the record stays with each worker.

  • Signed where the signal isn't

    In a basement or a dead zone, the crew can still sign the toolbox talk in Chrome on Android or on a computer. The sign-ins go out once the app is open with a signal again, and each one lands once.
  • Sheets and certificates in Spanish

    Toolbox talk PDFs and training certificates print in Spanish, and compliance reports come out in English, Spanish or both side by side.
  • Thirty hires on a Monday morning

    Import a spreadsheet, see line by line who was created and who wasn't, and print one sheet of QR badges for the morning toolbox talk. Email is optional.
  • Records that stay when a worker leaves

    When a worker leaves, their training records and competent person designation stay on file. The account can't take them along.

New sign-ups are paused · the free tools need no account