About the campaign
OSHA describes a Safety Stand-Down as a voluntary event for employers to talk directly to employees about safety, and says any workplace can hold one. In 2026, the 13th National Safety Stand-Down to Prevent Falls in Construction was held May 4 to 8; OSHA announces each year's dates on its Stand-Down page. OSHA's page gives the reason for the campaign: falls from elevation accounted for 389 of the 1,034 construction fatalities recorded in 2024, according to BLS data.
Companies can hold a stand-down by taking a break for a toolbox talk or another safety activity, such as an equipment inspection, a rescue plan or a discussion of job-specific hazards. OSHA's answers add that no registration is needed and that a stand-down can be as simple as a 15-minute toolbox talk or as long as several hours of training over a week. After a stand-down, employers have been able to download a certificate of participation from OSHA's page; HazComFast does not issue one.
Before the event
- Name a coordinator, and a lead for each site if you have several.
- Choose one real task at height for each crew: a ladder, a roof, a scaffold, stairs, structural steel, an opening, a fragile roof surface.
- Review your fall prevention program first: what training was given, what equipment is in use, and any falls or close calls.
- Invite the subcontractors, the owner or the designers working on the project.
- Decide when the stand-down happens and how long it lasts, for example at the start of a shift.
- Print the talk, the task checklist, the sign-in sheet and the follow-up sheet.
A 30-minute stand-down agenda
Hold the meeting at the task you chose, with the people who do it. The times are an example; keep each step.
0:00 to 0:05
Why we stopped
- Objective
- The crew knows which task at height the stand-down looks at, and why.
- Activity
- Name the task and the falls that can happen on it: from the ladder, from the roof edge, through an opening, from the scaffold.
- Action to follow up
- Note any fall or close call on this task the crew mentions.
0:05 to 0:12
The toolbox talk
- Objective
- The crew hears the protection for this task and the rule behind it.
- Activity
- Read the fall protection talk, or the roofing or ladder talk if the task is on a roof or a ladder.
- Action to follow up
- Note the questions the talk raises.
0:12 to 0:22
At the task
- Objective
- The crew checks the protection on the real task, from a safe position.
- Activity
- From the ground or a protected area, inspect the harnesses, lanyards and anchors, or the guardrails, covers and ladders the task uses. Nobody works at height during the meeting.
- Ask the crew
- If someone fell here today, how would we reach them, and how fast?
- Action to follow up
- List every damaged item and every gap in the protection.
0:22 to 0:27
Questions and suggestions
- Objective
- The crew says what would make the task safer.
- Activity
- Ask the three questions below and write down the suggestions.
- Action to follow up
- Pick the suggestions to act on.
0:27 to 0:30
Actions and sign-in
- Objective
- Each problem found has an owner and a due date.
- Activity
- Read the action list back to the crew, then pass the sign-in sheet.
- Action to follow up
- Fill in the follow-up sheet, and check each fix on site before closing it.
Three questions for the crew
- Where could someone fall on this task, and what stops the fall?
- If someone falls and is caught by a harness, who gets them down, and how fast?
- What would you change on this task to make it safer?
Checklist for the task at height
| Task | What to look at |
|---|---|
| Portable ladder used for access | Side rails extend at least 3 feet above the upper landing; where the ladder is too short for that, it is secured at its top and a grasping device such as a grab rail is provided (29 CFR 1926.1053(b)(1)). Feet, rungs and locks in good condition |
| Open side or edge, outside roofing work | Unprotected sides and edges 6 feet or more above a lower level are protected by guardrail systems, safety net systems or personal fall arrest systems (29 CFR 1926.501(b)(1)) |
| Roofing work | Low-slope roofs follow 29 CFR 1926.501(b)(10), which allows warning lines and safety monitoring under its conditions; steep roofs call for guardrails with toeboards, safety nets or personal fall arrest (29 CFR 1926.501(b)(11)) |
| Openings and covers | All covers shall be secured when installed (29 CFR 1926.502(i)(3)) and color coded or marked with the word HOLE or COVER (29 CFR 1926.502(i)(4)) |
| Personal fall arrest | Systems are inspected prior to each use, and defective components are removed from service (29 CFR 1926.502(d)(21)); the employer shall provide for prompt rescue of employees in the event of a fall (29 CFR 1926.502(d)(20)) |
| Scaffold | Scaffolds and scaffold components shall be inspected for visible defects by a competent person before each work shift (29 CFR 1926.451(f)(3)) |
Pick the rows that match the task. The talks linked below cover each one in more detail.
A stand-down is a briefing, not the fall protection training
The employer shall provide a training program for each employee who might be exposed to fall hazards (29 CFR 1926.503(a)(1)). A stand-down reminds the crew of that training and checks the task; it does not replace it.
Follow-up
Fill in one line per problem or suggestion. An action stays open until someone has checked the fix on site. The PDF and the Word file of this kit end with a follow-up sheet. For attendance, use the free safety meeting sign-in sheet; a signature shows who was present, not what each person understood.
Questions
Is a safety stand-down required by OSHA?
No. OSHA describes a Safety Stand-Down as a voluntary event for employers to talk directly to employees about safety. Fall protection training is a separate obligation: the employer shall provide a training program for each employee who might be exposed to fall hazards (29 CFR 1926.503(a)(1)).
When is the next fall prevention Stand-Down?
In 2026, the 13th National Safety Stand-Down to Prevent Falls in Construction was held May 4 to 8. OSHA announces each year's dates on its Stand-Down page, and OSHA says managers can plan a stand-down that works for their workplace at any time.
How long does a stand-down take?
OSHA's answer is that it is up to the employer: it can be as simple as a 15-minute toolbox talk or several hours of training over a week. The agenda in this kit takes 30 minutes.
Do we need to register to take part?
OSHA's answers say no registration is needed: hold the stand-down, then tell OSHA about it on its page, where employers have been able to download a certificate of participation.
Can a small company or a non-construction employer hold one?
Yes. OSHA says any number of people can hold a stand-down, participation is not limited to construction, and employers not exposed to fall hazards can use it to talk about the other hazards they face.
Related pages
- Fall protection hub
- Fall protection toolbox talk
- Roofing safety toolbox talk
- Ladder safety toolbox talk
- May safety topics and meeting plan
- Safety events and meeting kits
Sources
- OSHA, National Safety Stand-Down to Prevent Falls in Construction
- OSHA, Stand-Down frequently asked questions
- OSHA, Suggestions to prepare for a successful Stand-Down
- 29 CFR 1926.501, Duty to have fall protection
- 29 CFR 1926.502, Fall protection systems criteria and practices
- 29 CFR 1926.503, Training requirements
- 29 CFR 1926.1053, Ladders
- 29 CFR 1926.451, General requirements (scaffolds)
An independent HazComFast kit. OSHA runs the National Safety Stand-Down; this kit is not an OSHA document and gives no certificate. Not legal advice.