Skip to content

Urgent: Nov 20, 2026 — HCS 2024 Deadline. Get ready →

June Safety Topics and Meeting Plan

The first heat, and trenches. The first hot days catch crews that have not adjusted, and utility work is in full swing. The plan below gives 4 meetings, one a week, and one optional meeting: each with its objective, a full toolbox talk, a safe activity, a question for the crew and what to check afterward.

At a glance

  • 5 meetings for June, each linked to a full toolbox talk with a PDF and a sign-in sheet.
  • A HazComFast proposal, not an OSHA calendar. Move the meetings to the weeks when the work happens.
  • The PDF and Word plan repeat the meetings and add a follow-up sheet for the actions raised.

When the first hot days come, the workers who have not adjusted to the heat are the ones to watch. The month starts with acclimatization and water, checks that help can reach the site, and ends with a hazard the crew raises itself.

June is also the National Safety Council's National Safety Month. The National Safety Month kit organizes a campaign over the month; this page organizes the weekly meetings. Where the heat arrives in May, start the heat sessions in May, and where trench work is under way, keep the trench session.

The June meetings

Meeting 1 · about 10 minutes

The first hot days

Objective
The crew knows who is new to the heat or back from time away, and how their work in the heat builds up over the first days.
Activity
Name the workers who are new or returning, and agree on their schedule and their buddy for the first hot days.
Ask the crew
What are the first signs of heat illness, and what do you do?
Check afterward
Workers new to the heat have a buddy and a lighter start.
Full talk: Heat Stress Prevention

Meeting 2 · about 5 minutes

Water close to the work

Objective
Cool drinking water is close to the work, and the crew drinks before feeling thirsty. An adequate supply of potable water shall be provided in all places of employment (29 CFR 1926.51(a)(1)).
Activity
Walk from the farthest work area to the water and time the walk.
Ask the crew
How far is the water from where you will work today?
Check afterward
Water is placed near the work and refilled during the shift.
Full talk: Hydration

Meeting 3 · about 5 minutes

Help can reach us

Objective
The crew knows how an ambulance reaches the site and who meets it.
Activity
Check the site address, the gate an ambulance would use and who goes to meet it. Look at the first aid kit and the supplies for cooling a worker.
Ask the crew
Who calls 911, and who meets the ambulance at the gate?
Check afterward
The address and the gate are posted, and a person is named to meet responders.
Full talk: First Aid

Meeting 4 · about 5 minutes

A hazard the crew raises

Objective
One hazard raised by the crew is discussed and gets an owner.
Activity
Ask the crew which hazard on this site worries them most this month, and pick one to fix.
Ask the crew
What would you change on this site to make it safer?
Check afterward
The hazard has an owner and a date, and the crew hears what was done.
Full talk: Near Miss Reporting

Optional meeting · about 12 minutes

Trenches

Objective
Daily inspections of excavations shall be made by a competent person, before the start of work and after every rainstorm or other hazard increasing occurrence (29 CFR 1926.651(k)(1)).
Activity
Look at today's trench with the competent person and name its protective system.
Ask the crew
Who inspected this trench today, and what would make us stay out of it?
Check afterward
The protective system is in place before anyone enters the trench.
Full talk: Trenching & Excavation Safety

Before the first meeting

  • List the workers who are new to the heat or back from time away.
  • Set up water, shade and a place to cool down near the work.
  • Post the site address and the gate an ambulance would use.
  • Decide whether the crew joins National Safety Month, and with which kit.

Keep a record of each meeting with the free safety meeting sign-in sheet. A signature shows who was there, not what each person understood, so the check after each meeting matters as much as the signatures.

Campaigns and events in June

The National Safety Council holds National Safety Month in June. National Safety Council, National Safety Month

Other talks that fit June

The rest of the year

Each month has its own plan. The monthly safety topics page shows the whole year on one page, and the safety topics library has every toolbox talk by hazard, trade and season.

Sources

In a State Plan state, the state's own standard applies, and it can be stricter than the federal rule. Not legal advice.

Inside HazComFast

Run the June meetings, keep every signature

Print each talk for the meeting. In HazComFast, the crew signs the toolbox talk on a phone, in English or Spanish, and the record stays with each worker.

  • Signed where the signal isn't

    In a basement or a dead zone, the crew can still sign the toolbox talk in Chrome on Android or on a computer. The sign-ins go out once the app is open with a signal again, and each one lands once.
  • Sheets and certificates in Spanish

    Toolbox talk PDFs and training certificates print in Spanish, and compliance reports come out in English, Spanish or both side by side.
  • Thirty hires on a Monday morning

    Import a spreadsheet, see line by line who was created and who wasn't, and print one sheet of QR badges for the morning toolbox talk. Email is optional.
  • Records that stay when a worker leaves

    When a worker leaves, their training records and competent person designation stay on file. The account can't take them along.

New sign-ups are paused · the free tools need no account