Skip to content

Urgent: Nov 20, 2026 — HCS 2024 Deadline. Get ready →

Construction · CAS Database

Silicon Dioxide

Silicon Dioxide (CAS 7631-86-9) — Silica, a number used mostly for amorphous silica fillers; crystalline quartz, the form regulated as respirable crystalline silica, has its own CAS number, 14808-60-7. What OSHA's HazCom rules ask of it on a job site, and where its Safety Data Sheet comes from: your supplier.

Verified vs OSHA sources · October 19, 2026

CAS Registry Number CAS 7631-86-9 · also known as Silica, SiO2

Overview

Silica, a number used mostly for amorphous silica fillers; crystalline quartz, the form regulated as respirable crystalline silica, has its own CAS number, 14808-60-7

Synonyms:SilicaSiO2

OSHA Exposure Limits

OSHA permissible exposure limit (PEL) and secondary limit for Silicon Dioxide on a US construction site. Where a substance-specific 1926 standard applies, its codified limit is shown; otherwise the figure comes from Table 1 to 29 CFR 1926.55, the construction air-contaminants table. Where Table 1 gives no figure, either the substance has its own standard (the row says "see 1926.xxxx" and this page names that standard) or Table 1 sets no limit for it. In both cases Section 8 of the Safety Data Sheet lists the limits other bodies recommend and the supplier's controls.

LimitValueBasis / citation
OSHA PELSee SDS §8Not in 29 CFR 1926.55 Table 1; see SDS Section 8
Action levelSee SDS / standardNot all substances define an action level
Averaging periodSee SDS §8Compare with ACGIH TLV / NIOSH REL — often more protective than the OSHA PEL

Many OSHA PELs date to 1971 and may be less protective than current ACGIH/NIOSH values; always check Section 8 of the manufacturer SDS for the limits it lists, which can be lower than the PEL, and for its control guidance. Not legal advice.

GHS Classification

The manufacturer or importer of Silicon Dioxide (CAS 7631-86-9) classifies its hazards (29 CFR 1910.1200(d)(1)). You'll find them in Section 2, Hazard(s) identification, of the manufacturer's Safety Data Sheet (29 CFR 1910.1200(g)(2)(ii)).

Physical Properties

Molecular FormulaO2Si
Molecular Weight60.084 g/mol
Boiling Point4046 °F at 760 mmHg (NIOSH, 2024)
Melting Point3110 °F (NIOSH, 2024)
Density2.2 (NIOSH, 2024) - Denser than water; will sink
Vapor Pressure0 mmHg (approx) (NIOSH, 2024)
SolubilityInsoluble (NIOSH, 2024)

OSHA & HazCom Compliance Requirements

For construction work, Hazard Communication is governed by 29 CFR 1926.59 (adopts 29 CFR 1910.1200). Employers who use Silicon Dioxide must:

  • •Maintain an accessible SDS for Silicon Dioxide (readily accessible during each work shift, 29 CFR 1910.1200(g)(8))
  • •Keep the supplier's label on shipped containers (29 CFR 1910.1200(f)(1)) and mark workplace containers with the shipped-label elements or the product identifier and hazard information (29 CFR 1910.1200(f)(6)); a portable container for immediate use by the person who filled it needs none (1910.1200(f)(8))
  • •Include it in the workplace chemical inventory
  • •Train employees on hazards before initial assignment
  • •Retain employee exposure and medical records per 29 CFR 1910.1020 — 30-year retention applies to exposure/medical records, not to SDSs generically

HazCom (1910.1200 / construction 1926.59) covers hazard classification, labels, SDSs, the written program (with its chemical list and the rules for non-routine tasks and multi-employer sites) and training. It does not impose chemical storage segregation. Flammable & combustible liquid storage for construction is 29 CFR 1926.152; segregation of incompatibles is planned from SDS Sections 7 and 10. Not legal advice; state-plan states may have stricter rules.

Handling & Secondary-Container Labeling

When you transfer Silicon Dioxide into a workplace (secondary) container, OSHA gives two compliant options under 29 CFR 1910.1200(f)(6):

  • •(f)(6)(i): full GHS label elements (as on the shipped container)
  • •(f)(6)(ii): product identifier + words/pictures/symbols (or combination) that provide AT LEAST general information on the hazards and, with the other information immediately available under the HazCom program, the specific hazards

There is no volume/size cutoff for secondary containers — the ≤100 ml / ≤3 ml accommodations (29 CFR 1910.1200(f)(12) (added by the HCS 2024 final rule)) apply only to the manufacturer's shipped container. A portable container filled for the immediate use of the worker who fills it needs no label (29 CFR 1910.1200(f)(8)).

GHS Hazard Classification under OSHA HCS

OSHA's Hazard Communication Standard adopts the GHS (primarily GHS Revision 7 (HCS 2024)). It requires 8 hazard pictograms (Appendix C, Figure C.1). The Environment pictogram (GHS09) is not required by OSHA — Not in App C; outside OSHA jurisdiction; voluntary.

The 8 OSHA-required pictograms:

FlameFlame Over CircleExclamation MarkExploding BombCorrosionGas CylinderHealth HazardSkull and Crossbones

For flammable liquids, OSHA classifies by flash point and boiling point (App B.6.1 / 1910.106(a)):

  • •Category 1: FP < 73.4°F AND BP <= 95°F
  • •Category 2: FP < 73.4°F AND BP > 95°F
  • •Category 3: FP >= 73.4°F AND <= 140°F
  • •Category 4: FP > 140°F AND <= 199.4°F

The specific GHS classification of Silicon Dioxide comes from its Safety Data Sheet (Section 2). Use the live classification panel above and the manufacturer SDS to confirm pictograms and categories.

HCS 2024 Update Deadlines

Under the federal Hazard Communication Standard 2024 update (aligned primarily GHS Revision 7):

  • •May 19, 2026 — manufacturers, importers, and distributors update substance labels & SDSs (1910.1200(j)(2)(i))
  • •November 20, 2026 — employers, as necessary, update alternative workplace labels, the written program & training for newly identified hazards (1910.1200(j)(2)(ii))

During the interim, parties may comply with the 2012 HCS, the 2024 HCS, or both. These are the federal OSHA dates; State Plans adopt the update on their own schedules, so check your state.

Quick Actions

Put Silicon Dioxide on your written inventory, print the workplace label your containers need, and keep your supplier’s sheet reachable on the jobsite.

The safety data sheet for your product comes from the supplier who sold it to you — no public registry can provide it. For the underlying chemistry, the public record is on PubChem.

Where this fits in your HazCom program

  • SDS management — collecting the sheet, keeping it current, and making it readable during each work shift.
  • GHS labels & workplace labeling — what has to appear on the shipped container, and what a secondary container needs instead.

Frequently Asked Questions

What is Silicon Dioxide (CAS 7631-86-9)?

Silica, a number used mostly for amorphous silica fillers; crystalline quartz, the form regulated as respirable crystalline silica, has its own CAS number, 14808-60-7

What are the OSHA HazCom requirements for Silicon Dioxide on a construction site?

For construction work, Hazard Communication is governed by 29 CFR 1926.59 (adopts 29 CFR 1910.1200). Where a product you use containing Silicon Dioxide is a hazardous chemical under the standard (its supplier's label and SDS say so), you must keep its Safety Data Sheet accessible, keep the supplier's label on shipped containers and label workplace containers under (f)(6), list it in the written program's chemical inventory, and train workers on its hazards at initial assignment. Exemptions apply, such as a consumer product used the way a consumer would use it (1910.1200(b)(6)(ix)).

What is the OSHA permissible exposure limit (PEL) for Silicon Dioxide?

The exposure limits for Silicon Dioxide (the OSHA PEL, with the ACGIH TLV and NIOSH REL as recommendations) are listed in Section 8 of its Safety Data Sheet. OSHA construction air-contaminant limits are in Table 1 to 29 CFR 1926.55; many OSHA PELs predate current science, so an SDS may cite a more protective ACGIH/NIOSH value.

When does the updated HCS 2024 labeling apply to Silicon Dioxide?

Under the federal Hazard Communication Standard 2024 update (aligned primarily GHS Revision 7), manufacturers, importers and distributors must comply by May 19, 2026 when Silicon Dioxide is sold as a substance, and by November 19, 2027 for mixtures that contain it. Employers must, as necessary, update alternative workplace labels, the written program and training for newly identified hazards by November 20, 2026 for substances and May 19, 2028 for mixtures (29 CFR 1910.1200(j)). During the interim, parties may comply with the 2012 HCS, the 2024 HCS, or both. State Plans adopt the update on their own schedules, so check your state's dates.

How do I label a secondary (workplace) container of Silicon Dioxide?

Under 29 CFR 1910.1200(f)(6) you have two options: (i) the label elements of (f)(1)(i) through (v): product identifier, signal word, hazard statements, pictograms and precautionary statements, with no supplier name or address needed, or (ii) the product identifier plus words, pictures, symbols, or a combination that provide at least general hazard information and that, with the other information immediately available to workers under the HazCom program, give the specific hazards. There is no volume/size cutoff for secondary containers. A portable container filled from a labeled container, kept under the control of the worker who fills it and used only by that worker within the same shift, does not require a label (29 CFR 1910.1200(f)(8)).

How long must SDS and exposure records for Silicon Dioxide be kept?

Under 29 CFR 1910.1020, 30-year retention applies to employee exposure and medical records (medical records: duration of employment plus 30 years) — not to SDSs generically. Where an SDS is not retained, a record of the chemical's identity, where it was used, and when must be kept for at least 30 years.

Where can I find the SDS for Silicon Dioxide?

Under 29 CFR 1910.1200(g)(6) and (g)(7), the manufacturer or importer of Silicon Dioxide must ensure that distributors and employers receive its Safety Data Sheet with the initial shipment and with the first shipment after the sheet is updated, and a distributor passes it on in its commercial shipments the same way. Retail and wholesale distributors that sell to employers over the counter or to commercial accounts have their own duties in (g)(7)(iii) to (vii), such as providing the sheet on request. HazComFast keeps the sheets you collect in one inventory per jobsite, searchable by product, manufacturer or CAS number, and your jobsite's SDS load onto the phone on their own.

Regulatory data on this page is sourced from HazComFast's verified regulatory module (29 CFR 1926.59 / 1910.1200 and substance-specific 1926 standards), last verified October 19, 2026 against eCFR, OSHA.gov, and the Federal Register. Physical-property data comes from PubChem. Confirm it against the manufacturer Safety Data Sheet. This page is informational and is not legal advice.

Looking for more chemicals?

Browse our database of industrial chemicals with GHS data, safety information, and compliance tools.

Get the Binder in Order Before the Inspector Arrives. Are You Ready?

OSHA inspections come unannounced, apart from the few exceptions listed in 29 CFR 1903.6. Get the binder in order before the opening conference, not during it.

Serious Violation

$16,550

per violation (max)

HazComFast Pro

$199/mo

10 jobsites, unlimited chemicals, unlimited workers

New sign-ups are paused. The free tools below need no account, and customers can log in as usual.

Your account keeps working as usual. Cancel anytime.