At a glance
- 4 meetings for October, each linked to a full toolbox talk with a PDF and a sign-in sheet.
- A HazComFast proposal, not an OSHA calendar. Move the meetings to the weeks when the work happens.
- The PDF and Word plan repeat the meetings and add a follow-up sheet for the actions raised.
October brings heaters and enclosed work back, and NFPA's Fire Prevention Week takes place in October. The month covers the choice between leaving and fighting a small fire, the area around hot work, how flammable liquids are stored, and the exits and alarms everyone relies on.
Not every worker is expected to fight a fire. Each site decides who, if anyone, uses portable extinguishers, and the first meeting follows that decision.
The October meetings
Meeting 1 · about 5 minutes
Leave or fight a small fire
- Objective
- Everyone knows the site's rule: who may use an extinguisher, and that everyone else leaves.
- Activity
- Walk to the nearest extinguisher and the nearest exit from today's work area. Those allowed to use an extinguisher point out its type and its gauge.
- Ask the crew
- A small fire starts in a trash can near you. What do you do under our site's rule?
- Check afterward
- The crew can state the site's rule and the way out.
Meeting 2 · about 10 minutes
Hot work
- Objective
- Before hot work starts, the area is checked, the permit is filled in where the site uses one, and the fire watch is named.
- Activity
- Look at today's hot work area: what could burn within reach of sparks and slag, and who watches.
- Ask the crew
- What do we move or cover before the first spark?
- Check afterward
- Combustibles are moved or covered before hot work starts.
Meeting 3 · about 8 minutes
Fuel and solvent storage
- Objective
- Flammable liquids on site are kept in containers made for them, closed and labeled, away from heat and sparks.
- Activity
- Check the fuel cans and solvent containers on site: type, label, cap, and where they sit.
- Ask the crew
- Where do we refuel equipment, and what stays away from that spot?
- Check afterward
- Containers are closed and labeled, and none sit near a heater or hot work.
Meeting 4
Exits and alarms
- Objective
- Exit routes are clear, and the alarm can be heard everywhere people work.
- Activity
- Walk the exit routes from the work areas and clear anything in the way. From the loudest work area, check how the crew would hear the alarm.
- Ask the crew
- How would you hear the alarm from where you work today, and where do you go?
- Check afterward
- Exit routes are clear and the assembly point is known.
Before the first meeting
- Confirm the site's rule on who may use portable extinguishers.
- Check the extinguishers and their inspection tags.
- List this month's hot work and who will be the fire watch.
- Walk the exit routes before the fourth meeting.
Keep a record of each meeting with the free safety meeting sign-in sheet. A signature shows who was there, not what each person understood, so the check after each meeting matters as much as the signatures.
Campaigns and events in October
NFPA's Fire Prevention Week takes place in October. NFPA, Fire Prevention Week
Other talks that fit October
The rest of the year
Each month has its own plan. The monthly safety topics page shows the whole year on one page, and the safety topics library has every toolbox talk by hazard, trade and season.
Sources
In a State Plan state, the state's own standard applies, and it can be stricter than the federal rule. Not legal advice.