Reckitt Benckiser LLC's sheet for Lysol Disinfecting Wipes lists no hazard classification, so the paragraphs of 29 CFR 1910.1200 written for hazardous chemicals are not set off by this sheet (1910.1200(c) and (d)(1)). The same name can carry another formula: read the sheet that came with your product.
Product as the sheet names it
Lysol Disinfecting Wipes
Maker
Reckitt Benckiser LLC
SDS number
D8298990
Revision date as read on Oct 21, 2026
Jun 5, 2020 (the sheet calls it "Date of issue"), version 2.0
Lysol Disinfecting Wipes in the scents the sheet lists (EPA ID No. 777-114).
Read in the maker's sheet on October 21, 2026: SDS number D8298990, Date of issue Jun 5, 2020, 13 pages. The maker's version is the one that counts.
Lysol Disinfecting Wipes: facts read in the safety data sheet, by section
Section 2, hazards
Section 2 says the product is not classified, with no signal word and no known significant effects or critical hazards.
Section 3, ingredients
Ethanol (CAS 64-17-5) and D-glucopyranose, oligomeric, C9-11-alkyl glycosides (CAS 132778-08-6) at no more than 5 % each.
Quaternary ammonium compounds, benzyl-C12-16-alkyldimethyl, chlorides (CAS 68424-85-1) at no more than 1 %.
The sheet says a range protects confidentiality or reflects batch variation.
Section 4, first aid
Eyes: flush at once with plenty of water, lifting the eyelids, and remove contact lenses. Get medical attention if irritation occurs.
Skin: flush with plenty of water and remove contaminated clothing and shoes. Get medical attention if symptoms occur.
Inhaled: move to fresh air and keep at rest. Get medical attention if symptoms occur.
Swallowed: wash out the mouth and give small amounts of water if the person is conscious. Do not induce vomiting unless medical personnel direct it.
The sheet lists no known significant effects or critical hazards.
Section 5, fire fighting
Use an extinguishing agent suitable for the surrounding fire. The sheet names no unsuitable media.
No specific fire or explosion hazard. Decomposition products may include carbon dioxide and carbon monoxide.
Firefighters wear self-contained breathing apparatus with a full face-piece in positive pressure mode.
Section 7, handling and storage
Store in the original container, away from direct sunlight, in a dry, cool, well-ventilated place.
Keep the container tightly closed and sealed until ready for use.
Keep away from incompatible materials, food and drink.
Section 8, exposure limits
The sheet lists no OSHA permissible exposure limit for this product. Section 8 lists no occupational exposure limit.
Section 8, protection
Respiratory protection: Section 8 says to select a respirator based on the hazard and the potential for exposure, used under a respiratory protection program.
Safety eyewear when a risk assessment shows it is needed.
The sheet names eyewash equipment.
Section 9, flash point
closed cup > 199.9 °F (> 93.3 °C), based on ingredient data
Section 9, other properties
Presaturated wipes, white, with a characteristic odor.
pH 10.5 at 100 %. Relative density 0.985.
Section 10, what to avoid
The sheet gives no conditions to avoid and no incompatible materials. The product is stable.
Section 14, transport
Not regulated.
What this product triggers under OSHA
This SDS lists no hazard classification, so the paragraphs written for hazardous chemicals are not set off by it. The same name can carry a different formula. (29 CFR 1910.1200(c), (d)(1))
The sheet gives an EPA registration number (777-114). A pesticide subject to FIFRA labeling is outside the HazCom labeling paragraphs, so no label is offered here; the sheet and training paragraphs still apply. (29 CFR 1910.1200(b)(5)(i))
The sheet names the product use as surface disinfectant, consumer use, and says it is not applicable for consumer use. The standard does not apply to a consumer product the employer shows is used as its maker intended, at no more than consumer exposure. (29 CFR 1910.1200(b)(6)(ix), (b)(5)(v))
Section 8 mentions a respirator: the employer provides one when necessary to protect health and keeps a respiratory protection program. (29 CFR 1910.134(a)(2); 1926.103)
Container label from this SDS
No label is offered here: the product is an EPA-registered pesticide. To label a container of a product you do use, the secondary container label maker builds the label from the sheet you type in.
Finding the Lysol Disinfecting Wipes sheet is the easy part
Keeping every sheet read, current and ready for an inspector is the work that never ends. HazComFast does it with your crew: the AI extracts each sheet, and every reading leaves a proof.
Extraction: the AI reads every sheet
Scanned, long or in Spanish, it reads
Drop in the Lysol Disinfecting Wipes sheet, scanned or not, in English or Spanish. HazComFast reads every page, with progress shown page by page, so a 32-page sheet gets read to the last page.
Every section a foreman needs
Composition, spill response, storage, physical properties, stability and toxicology land on the product page with their source, so the sections a foreman actually needs aren't buried in a PDF.
The AI proposes, a person signs off
Each hazard shows where it came from: extracted from the sheet, or confirmed by a named person on a date. Confidence is measured against the text of the sheet, and below a floor every field is checked by hand before it saves.
A pictogram is never guessed
A pictogram only goes on your label if it's actually on the sheet or follows from its H-codes. H225 on the sheet means GHS02 and DANGER on the label, derived from OSHA's Appendix C.
Checked against 200 real sheets
Every change to the AI is checked against a reference set of 200 real SDSs before it ships. A field it isn't sure about is highlighted for you to check, and the inventory flags products whose extraction hasn't been validated yet.
Proof of reading, without the chasing
Nobody has to remember to ask
Add a hazardous product to a site and every worker there gets one notice with a 7-day due date. A reminder follows at day 3 and an escalation at day 7.
“I read it” can't be a reflex tap
The confirm button stays grey until the worker has scrolled through first aid or to the last page of the PDF and has spent 15 seconds there. The record keeps how long and how far.
A proof of reading the worker keeps
The worker ticks an attestation, and the record keeps which SDS version they read, the server time and the device. They can download their own PDF of it.
A new sheet means a new reading
When a manufacturer updates a sheet and the hazards change, everyone who confirmed the old one is asked to read the new one. Each confirmation keeps which version they read, for which jobsite.
Who read what, in one console
See who hasn't read what, nudge everyone overdue in one click, and export last month's confirmations for one jobsite, each with the SDS version they read.
The reading joins the training file
Each confirmed reading also lands in the worker's training file as a HazCom reading record, so your training records and your SDS records tell the same story.
From the sheet to the label
A label that can't go out empty
A label with five pictograms keeps all five, because the format switches. A label with no hazard information won't print. When the sheet changes, you get a relabeling task with its six-month deadline.
English and Spanish, side by side
Hazard and precautionary statements show in English and Spanish on every product page. A Spanish sheet that says PELIGRO is recorded as DANGER, and the original file stays attached as you received it.
Every print on record
Every print run is logged with exactly what went on the labels. When a hazard changes, the relabel task can only be closed by a print made after the change.
In the field, on the phone
Scan the drum
Scan the QR code on a drum and the page shows the maker and the CAS number under the title, so you know you hold the right one. A drum taken out of inventory still opens its SDS, marked as removed.
Search inside the sheet
Type “eye contact” and you land on first aid. Pinch to zoom on the small print.
Still there with no signal
Offline, the worker opens the sheet itself, with first aid and what to do in a spill. “Available offline” only shows when the PDF is on the phone.
When the inspector asks
The binder, in one click
One click gives you the jobsite's SDS binder, with Lysol Disinfecting Wipes in it, as a ZIP with a CSV index, and a dated CSV or PDF of who confirmed reading what. That is what you hand an inspector or a GC.
No expired-sheet myth
HazComFast never tells you a sheet has expired, because OSHA doesn't set an expiration date. You choose your own review interval, and the app labels it as your internal policy.
The chemical list behind it
Bring your spreadsheet
Imported products get the same pictograms as ones entered by hand, and importing the same file twice doesn't duplicate anything.
Each product, at every site
Each product page shows every site it's stored at with quantities, and warns you if something incompatible is stored at the same site.
A program that stays true
The chemical list in your HazCom program is built from each jobsite's inventory. Remove a product and the program tells you the list is out of date, with a button to rebuild it.
Start with the free SDS Binder Kit. It works with nothing but a printer.
Where do I get the SDS for Lysol Disinfecting Wipes?
From Reckitt Benckiser LLC. The button at the top of this page opens its own copy (SDS number D8298990, Date of issue Jun 5, 2020). It covers Lysol Disinfecting Wipes in the scents the sheet lists (EPA ID No. 777-114).
Is Lysol Disinfecting Wipes a hazardous chemical under OSHA?
Section 2 lists no hazard classification, so this sheet does not set off the paragraphs written for hazardous chemicals (29 CFR 1910.1200(c)). Its consumer wording matters (1910.1200(b)(6)(ix)). As a pesticide, its label follows FIFRA (1910.1200(b)(5)(i)).