In New Hampshire, a serious violation of 29 CFR 1910.178 (Forklifts) carries a maximum penalty of $16,550 per violation in 2026, rising to $165,514 for a willful or repeat violation. Forklifts is enforced for private construction employers by federal OSHA.
29 CFR 1910.178 · New Hampshire
Forklifts Requirements in New Hampshire
Forklifts in New Hampshire: 2026 penalties, who enforces 29 CFR 1910.178, the paragraphs cited and free tools.
Verified vs OSHA sources · 2026-10-05
New HampshireGeneral Industry (29 CFR 1910)Federal OSHA Jurisdiction
In New Hampshire, federal OSHA enforces 29 CFR 1910.178. The federal maximum for a serious violation is $16,550.
$16,550
federal maximum for a serious violation
$165,514
federal maximum for a willful or repeat violation
1.7
fatal work injuries per 100,000 full-time workers, all industries, New Hampshire, 2024 (BLS)
Federal OSHA in New Hampshire: 29 CFR 1910.178, FY2025
Counted · 2026-09-263
citations of 29 CFR 1910.178 in 2 inspections
$6,534
penalties, current amounts ($13,695 as first proposed)
0.8%
of the 375 federal construction citations in New Hampshire
In FY2025, federal OSHA cited 29 CFR 1910.178 (Forklifts) 3 times in inspections of New Hampshire construction employers. It ranked 18th of the 53 standards cited in them. By classification: 2 serious, 1 other-than-serious. Most-cited paragraphs: 1910.178(l)(6) (1), 1910.178(l)(1)(i) (1), 1910.178(q)(7) (1).
NAICS 23 classifies the employer, not the work: these counts cover every 29 CFR 1910.178 citation issued to a construction company in New Hampshire, whatever the task.
Counted by HazComFast from the U.S. Department of Labor's OSHA enforcement data (inspection and violation tables, retrieved September 26, 2026): citations issued October 1, 2024 – September 30, 2025 on federal OSHA inspections of construction employers (NAICS 23) in the state, deleted citations excluded, penalties at current amounts. OSHA's own cited-standards tool does not break federal states out; summed over every state, this count matches it within a few citations (6,778 for 1926.501, against 6,772). data.dol.gov
What federal OSHA is targeting in New Hampshire
New Hampshire has no state OSHA plan for private-sector work, so there is no state rule to read. What differs here is which hazards federal OSHA schedules inspections for, as set out in published emphasis directives.
Regional Local Emphasis Program for Powered Industrial Trucks
BOS-CPL-04-00-027 · Boston Regional Office · effective October 1, 2024
“This instruction applies to Boston Region Federal Area and District Office jurisdictions.”
Forklifts have their own programmed-inspection program across the Boston region's federal area and district offices. Operator training and evaluation records under 1910.178(l) are the first thing asked for, and the program runs alongside the region's residential construction and crane programs rather than instead of them.
Contact incidents and work deaths in New Hampshire, 2024
New Hampshire recorded 12 fatal work injuries in 2024, down from 21 in 2023. Contact incidents caused 3 of them (25%). Construction accounted for 5.
Source: BLS Census of Fatal Occupational Injuries, New Hampshire, 2024
How New Hampshire Enforces 29 CFR 1910.178
New Hampshire has no State Plan, so federal OSHA has jurisdiction. 29 CFR 1910.178 is enforced by U.S. Department of Labor compliance officers using standard federal procedures and the federal penalty maximums.
29 CFR 1910.178 is a general-industry standard. Whether this general-industry standard reaches construction work has not been verified for this page. Check the standard's own scope paragraph and the corresponding 29 CFR 1926 subpart before relying on it for construction.
Help and oversight in New Hampshire
Free, confidential help: OSHA On-Site Consultation
In New Hampshire, the program is WorkWISE NH (Keene State College). OSHA describes it as “Primarily for smaller businesses, no-cost, confidential consultations help employers identify and address hazards and establish or improve safety and health programs.” It is separate from OSHA enforcement; the employer commits to correcting serious hazards.
New Hampshire consultation program · OSHA consultation directory
Who inspects private employers here
Federal OSHA, from the Concord Area Office (Concord).
Read on osha.gov and the state's official statute site, September 26, 2026.
New Hampshire Penalty Amounts for 29 CFR 1910.178 (2026)
Verified · 2026-10-05| Violation type | 2026 maximum | Basis |
|---|---|---|
| Serious | $16,550 | Federal max · 29 CFR 1903.15(d) |
| Willful | $165,514 | Federal max · 29 CFR 1903.15(d) |
| Repeat | $165,514 | Federal max · 29 CFR 1903.15(d) |
| Failure to abate | $16,550/day | up to $16,550 per day; total capped at 30x the daily amount (FOM Ch.6) |
New Hampshire applies the federal OSHA maximums. Amounts are ceilings per violation. Federal OSHA reduces the proposed penalty for employer size, good faith and history (FOM CPL 02-00-164 Ch. 6). There was no inflation increase for 2026: the 2025 amounts remain in effect (OMB Memo M-26-11).
Key Forklifts Requirements 29 CFR 1910.178
- Train and evaluate all forklift operators
- Conduct operator evaluations every 3 years
- Inspect forklifts before each shift
- Maintain forklifts per manufacturer specifications
- Follow safe operating practices (speed, loads, pedestrians)
- Designate approved truck types for hazardous locations
Who enforces it in New Hampshire: Federal OSHA inspects private construction employers; New Hampshire has no State Plan.
The compliance checklist, the paragraphs OSHA cites nationally and what an inspector checks under 29 CFR 1910.178 are on the 29 CFR 1910.178 page.
What a Forklifts Violation Looks Like
Each item below breaches a specific paragraph of 29 CFR 1910.178. It is a list of requirements, not a ranking. A serious violation carries up to $16,550.
- Operators not trained, evaluated, or certified before operating (1910.178(l)(1)).
- No re-evaluation of operator performance within the last 3 years (1910.178(l)(4)(iii)).
- No pre-shift examination of the truck, or unsafe trucks left in service (1910.178(p)(1)/(q)).
- Unsafe operating practices (speeding, riders, raised-load travel, blocked visibility) (1910.178(m)/(n)).
- Failure to provide refresher training after an accident or observed unsafe operation (1910.178(l)(4)).
New Hampshire Safety & Enforcement Profile
26,559
Federal construction citations (national, FY2025)
375 of them in New Hampshire (HazComFast count)
Federal OSHA
Enforces private construction
- Construction trades inspected most in New Hampshire, FY2025: Roofing Contractors (46), Framing Contractors (20) and New Multifamily Housing Construction (except For-Sale Builders) (11), out of 150 inspections opened (federal OSHA and State Plan combined).
- Construction fatality rate in New Hampshire, 2024: 10.4 per 100,000 full-time workers, 13th highest of the 40 states BLS published (all industries: 1.7).
HazComFast count from the Labor Department's OSHA enforcement data: inspections of construction employers (NAICS 23) opened from October 1, 2024 to September 30, 2025, federal OSHA and State Plan combined, grouped by the inspected employer's 2022 NAICS industry. Industry names are the Census Bureau's 2022 NAICS titles. data.dol.gov · BLS fatality rates by state, 2024
Free Forklifts Compliance Tools
Forklifts FAQ for New Hampshire
Which New Hampshire industries most often face a Forklifts inspection?
Forklifts inspections reach employers in New Hampshire covered by this standard, not the construction trades. Federal OSHA inspects these employers directly, since New Hampshire has no state plan covering the private sector.
How often is Forklifts cited in New Hampshire?
29 CFR 1910.178 is enforced against employers in New Hampshire covered by this standard, so the construction citation totals published for New Hampshire (OSHA Frequently Cited Standards, NAICS 23) do not measure it. Whether this general-industry standard reaches construction work has not been verified for this page. Check the standard's own scope paragraph and the corresponding 29 CFR 1926 subpart before relying on it for construction.
Who enforces forklift rules in New Hampshire?
Federal OSHA, not a state agency. New Hampshire has no state plan, so federal compliance officers from OSHA's Boston region inspect and cite 1910.178 on private jobsites, including operator training under paragraph (l) and the examination of each truck before it is placed in service under paragraph (q)(7).
Can I get free OSHA help in New Hampshire without an inspection?
Yes. OSHA's On-Site Consultation Program in New Hampshire is WorkWISE NH (Keene State College). OSHA describes it this way: "Primarily for smaller businesses, no-cost, confidential consultations help employers identify and address hazards and establish or improve safety and health programs." Consultations are separate from OSHA enforcement, and the employer commits to correcting serious hazards.
How often does federal OSHA cite 29 CFR 1910.178 in New Hampshire construction?
In FY2025, federal OSHA cited 29 CFR 1910.178 (Forklifts) 3 times in 2 inspections of New Hampshire construction employers, with $6,534 in penalties at current amounts ($13,695 as first proposed), 0.8% of the 375 citations those inspections produced. It ranked 18th of the 53 standards cited. (HazComFast count from U.S. Department of Labor OSHA enforcement data, retrieved 2026-09-26.)
Forklifts Guides & Resources
Compare this combination against any other state and standard with the enforcement risk lookup.
Forklifts in Other States
15 other state plans write a rule of their own for 29 CFR 1910.178 rather than adopting the federal text unchanged. Those are listed first. Compare all of them side by side.
Alaska29 CFR 1910.178 as adopted by 8 AAC 61.1010(b), with the air contaminant table at 8 AAC 61.1100California8 CCR §3650 (operation) and §3668 (operator training)own maxHawaii29 CFR 1910.178 as incorporated by HAR §12-60-50(a), with §12-60-5Kentucky803 KAR 2:313 (Subpart N), with 803 KAR 2:325 for battery workown maxMichiganMIOSHA General Industry Part 21, R 408.12101 to R 408.12193 (permit at R 408.12154)own maxMinnesotaMinn. R. 5207.0900, with Minn. R. 5207.1100 for platformsNevadaNAC 618.342 to 618.410 (cranes), with NAC 618.394 for tower crane plansNorth Carolina29 CFR 1910.178 as incorporated by 13 NCAC 07F .0101
Other OSHA Standards in New Hampshire
Sources & verification
Penalty amounts and plan-type data were checked on 2026-10-05 against eCFR, OSHA.gov, and the Federal Register. This page is informational and not legal advice; consult the enforcing agency or counsel for your specific situation.
Get the Binder in Order Before the Inspector Arrives. Are You Ready?
OSHA does not give advance notice of inspections (29 CFR 1903.6). Get the binder in order before the opening conference, not during it.
Serious Violation
$16,550
per violation (max)
VS
HazComFast Pro
$199/mo
10 jobsites, unlimited chemicals, unlimited workers
New sign-ups are paused. The free tools below need no account, and customers can log in as usual.
Your account keeps working as usual. Cancel anytime.