In Alaska, a serious violation of 29 CFR 1910.147 (Lockout/Tagout (LOTO)) carries a maximum penalty of $16,550 per violation in 2026, rising to $165,514 for a willful or repeat violation. Lockout/Tagout (LOTO) is enforced for private construction employers by Alaska Occupational Safety & Health.
29 CFR 1910.147 · Alaska
Lockout/Tagout (LOTO) Requirements in Alaska
Lockout/Tagout (LOTO) in Alaska: 2026 penalties, who enforces 29 CFR 1910.147, the paragraphs cited and free tools.
Verified vs OSHA sources · 2026-10-05
AlaskaGeneral Industry (29 CFR 1910)State Plan: Alaska Occupational Safety & Health
29 CFR 1910.147 does not apply to construction work. In Alaska, Alaska Occupational Safety & Health enforces 29 CFR 1910.147. The federal maximum for a serious violation is $16,550.
$16,550
federal maximum for a serious violation
$165,514
federal maximum for a willful or repeat violation
7.1
fatal work injuries per 100,000 full-time workers, all industries, Alaska, 2024 (BLS)
What Alaska's own rule says
Lockout/tagout is adopted as federal text "as amended" and Alaska added nothing to it, so the standard and its construction exclusion apply as written. What distinguishes Alaska's approach from most State Plans is that dynamic adoption: where Wyoming, Arizona, Utah and Hawaii pin a named edition or date and exclude later amendments, Alaska takes the federal standard as it stands, subject only to the ranges listed in 8 AAC 61.1010 and the additional state standards that follow it.
29 CFR 1910.147 as adopted by 8 AAC 61.1010(b)The duty matches the federal text. Only the citation number differs.
Read in Alaska Occupational Safety & Health's own rule text · verified 2026-08-09
Contact incidents and work deaths in Alaska, 2024
Alaska recorded 24 fatal work injuries in 2024, down from 29 in 2023. Contact incidents caused 5 of them (21%).
Source: BLS Census of Fatal Occupational Injuries, Alaska, 2024
How Alaska Enforces 29 CFR 1910.147
Alaska runs an OSHA-approved State Plan administered by Alaska Occupational Safety & Health, which covers private-sector construction. Its compliance officers enforce Alaska's own standards, which must be at least as effective as federal OSHA's and may go further. On this subject the rule is 29 CFR 1910.147 as adopted by 8 AAC 61.1010(b). Alaska Occupational Safety & Health issued no citations under 29 CFR 1910.147 in Alaska construction in FY2025. Alaska applies the federal penalty maximums.
29 CFR 1910.147 is a general-industry standard and does not govern construction work. “This standard does not cover the following: (A) Construction and agriculture employment”. Branding a construction program “1910.147 compliant” cites the wrong standard. Unlike confined spaces, Part 1926 has no wholesale re-enactment of 1910.147: construction energy-control duties are spread across hazard-specific provisions, so no single construction equivalent is named here. An Alaska contractor auditing against 29 CFR 1910.147 is auditing against the wrong standard. The citation an officer writes on a construction site will name the 1926 provision, not this one.
HazComFast records the state of every jobsite and shows that the Alaska State Plan governs it. Start free
Help and oversight in Alaska
Free, confidential help: OSHA On-Site Consultation
In Alaska, the program is Consultation and Training (Alaska Occupational Safety and Health). OSHA describes it as “Primarily for smaller businesses, no-cost, confidential consultations help employers identify and address hazards and establish or improve safety and health programs.” It is separate from OSHA enforcement; the employer commits to correcting serious hazards.
Read on osha.gov and the state's official statute site, September 26, 2026.
Alaska Penalty Amounts for 29 CFR 1910.147 (2026)
Verified · 2026-10-05| Violation type | 2026 maximum | Basis |
|---|---|---|
| Serious | $16,550 | Federal max · 29 CFR 1903.15(d) |
| Willful | $165,514 | Federal max · 29 CFR 1903.15(d) |
| Repeat | $165,514 | Federal max · 29 CFR 1903.15(d) |
| Failure to abate | $16,550/day | up to $16,550 per day; total capped at 30x the daily amount (FOM Ch.6) |
Alaska applies the federal OSHA maximums. Amounts are ceilings per violation. Alaska Occupational Safety & Health computes proposed penalties under its own State Plan procedures.
Key Lockout/Tagout (LOTO) Requirements 29 CFR 1910.147
- Develop machine-specific energy control procedures
- Train authorized, affected, and other employees
- Use standardized lockout/tagout devices
- Follow the 6-step LOTO sequence
- Conduct annual periodic inspections of procedures
- Coordinate group lockout for multi-employee servicing
Who enforces it in Alaska: Alaska Occupational Safety & Health inspects private employers, construction included, under an OSHA-approved State Plan. Alaska Occupational Safety & Health can add requirements beyond the federal standard above, so check its own rules as well.
The compliance checklist, the paragraphs OSHA cites nationally and what an inspector checks under 29 CFR 1910.147 are on the 29 CFR 1910.147 page.
What a Lockout/Tagout (LOTO) Violation Looks Like
Each item below breaches a specific paragraph of 29 CFR 1910.147. It is a list of requirements, not a ranking. A serious violation carries up to $16,550.
- No documented, machine-specific energy control procedures (1910.147(c)(4)).
- Failure to conduct the required at-least-annual periodic inspection of procedures (1910.147(c)(6)).
- Authorized/affected employees not trained (or retrained after changes) (1910.147(c)(7)).
- Stored or residual energy not released or restrained before servicing (1910.147(d)(5)).
- No verification of de-energization/isolation before work begins (1910.147(d)(6)).
Alaska Safety & Enforcement Profile
213
FY2025 construction citations
Alaska Occupational Safety & Health
Enforces private construction
- Construction trades inspected most in Alaska, FY2025: Commercial and Institutional Building Construction (20), Highway, Street, and Bridge Construction (12) and Power and Communication Line and Related Structures Construction (7), out of 88 inspections opened (federal OSHA and State Plan combined).
- Fatal injury rate in Alaska, 2024: 7.1 per 100,000 full-time workers, all industries. BLS did not publish a 2024 construction rate here.
HazComFast count from the Labor Department's OSHA enforcement data: inspections of construction employers (NAICS 23) opened from October 1, 2024 to September 30, 2025, federal OSHA and State Plan combined, grouped by the inspected employer's 2022 NAICS industry. Industry names are the Census Bureau's 2022 NAICS titles. data.dol.gov · BLS fatality rates by state, 2024
Free Lockout/Tagout (LOTO) Compliance Tools
Lockout/Tagout (LOTO) FAQ for Alaska
Which Alaska industries most often face a Lockout/Tagout (LOTO) inspection?
Lockout/Tagout (LOTO) inspections reach general-industry employers in Alaska, not the construction trades. Alaska Occupational Safety & Health inspects these employers directly and may apply requirements beyond the federal standard. A construction employer is not governed by 29 CFR 1910.147, and the construction-side duties on this subject are not concentrated in a single standard. Check your Part 1926 obligations instead.
How often is Lockout/Tagout (LOTO) cited in Alaska?
29 CFR 1910.147 is enforced against general-industry employers in Alaska, so the construction citation totals published for Alaska (OSHA Frequently Cited Standards, NAICS 23) do not measure it. “This standard does not cover the following: (A) Construction and agriculture employment”. Branding a construction program “1910.147 compliant” cites the wrong standard. Unlike confined spaces, Part 1926 has no wholesale re-enactment of 1910.147: construction energy-control duties are spread across hazard-specific provisions, so no single construction equivalent is named here. A construction employer is not governed by 29 CFR 1910.147, and the construction-side duties on this subject are not concentrated in a single standard. Check your Part 1926 obligations instead.
Does AKOSH require a written lockout/tagout program?
Yes. 29 CFR 1910.147 requires an energy control program with documented procedures for the equipment serviced, employee training, and a periodic inspection of each procedure at least annually. In Alaska, AKOSH, the state's own program, can cite the missing program, missing machine-specific steps, or the failure to isolate stored energy before service.
Who enforces lockout/tagout (1910.147) in Alaska?
AKOSH, Alaska Occupational Safety and Health, a division of the Department of Labor and Workforce Development. Alaska runs a full OSHA-approved State Plan, so a state compliance officer inspects and cites 1910.147 on private jobsites.
Can I get free OSHA help in Alaska without an inspection?
Yes. OSHA's On-Site Consultation Program in Alaska is Consultation and Training (Alaska Occupational Safety and Health). OSHA describes it this way: "Primarily for smaller businesses, no-cost, confidential consultations help employers identify and address hazards and establish or improve safety and health programs." Consultations are separate from OSHA enforcement, and the employer commits to correcting serious hazards.
Lockout/Tagout (LOTO) Guides & Resources
Compare this combination against any other state and standard with the enforcement risk lookup.
Related standards
Lockout/Tagout (LOTO) in Other States
7 other state plans write a rule of their own for 29 CFR 1910.147 rather than adopting the federal text unchanged. Those are listed first. Compare all of them side by side.
California8 CCR §3314 (applied to all employments by §3202(a))own maxHawaii29 CFR 1910.147 as incorporated by HAR §12-60-50(a), with §12-60-4 and §12-60-6Indiana29 CFR 1910.147 as applied in Indiana; review by the board of safety review, not OSHRCown maxKentucky803 KAR 2:309, Section 3own maxMinnesotaMinn. R. 5207.0600Nevada29 CFR 1910.147 as applied in Nevada, with NRS 618.383UtahUtah Admin. Code R614-1-5.D.6.bown maxAlabama
Other OSHA Standards in Alaska
Sources & verification
Penalty amounts and plan-type data were checked on 2026-10-05 against eCFR, OSHA.gov, and the Federal Register. This page is informational and not legal advice; consult the enforcing agency or counsel for your specific situation.
Get the Binder in Order Before the Inspector Arrives. Are You Ready?
OSHA does not give advance notice of inspections (29 CFR 1903.6). Get the binder in order before the opening conference, not during it.
Serious Violation
$16,550
per violation (max)
VS
HazComFast Pro
$199/mo
10 jobsites, unlimited chemicals, unlimited workers
New sign-ups are paused. The free tools below need no account, and customers can log in as usual.
Your account keeps working as usual. Cancel anytime.