Skip to content

Approaching: Nov 20, 2026 — HCS 2024 Deadline. Get ready →

Metals · CAS Database

Graphite

Graphite (CAS 7782-42-5) — Lubricant and electrode material. Get the SDS and OSHA HazCom guidance you need to store, label, and handle it safely on the job site.

Verified vs OSHA sources · October 5, 2026

CAS Registry Number CAS 7782-42-5 · also known as Plumbago, Carbon

Overview

Lubricant and electrode material

Synonyms:PlumbagoCarbon

OSHA Exposure Limits

OSHA permissible exposure limit (PEL) and secondary limit for Graphite on a US construction site. Where a substance-specific 1926 standard applies, its codified limit is shown; otherwise the figure comes from Table 1 to 29 CFR 1926.55, the construction air-contaminants table. Where 1926.55 does not list the substance, the Safety Data Sheet (Section 8) controls.

LimitValueBasis / citation
OSHA PELSee SDS §829 CFR 1926.55 Table 1OSHA entry: Graphite, natural, respirable dust
Action levelSee SDS / standardNot all substances define an action level
Averaging periodSee SDS §8Compare with ACGIH TLV / NIOSH REL — often more protective than the OSHA PEL

The table refers this substance to Table 2 to § 1926.55, the mineral-dust table, whose limits are expressed in millions of particles per cubic foot rather than ppm or mg/m³.

Many OSHA PELs date to 1971 and may be less protective than current ACGIH/NIOSH values; always check the manufacturer SDS (Section 8) for the controlling limit and engineering-control guidance. Not legal advice.

GHS Classification

The manufacturer or importer of Graphite (CAS 7782-42-5) classifies its hazards (29 CFR 1910.1200(d)(1)). You'll find them in Section 2, Hazard(s) identification, of the manufacturer's Safety Data Sheet (29 CFR 1910.1200(g)(2)(ii)).

Physical Properties

Molecular FormulaC
Molecular Weight12.011
Boiling PointSublimes at 3642 °C; triple point (graphite-liquid-gas), 4492 °C at a pressure of 101.325 kPa
Melting PointMelting point equals greater than 3500 °C
DensityThe apparent density of beech charcoal is 0.45 g/mL and that of pine charcoal is 0.28 g/mL; the density of pore-free charcoal ranges between 1.38 and 1.46 g/mL, depending on the kind of wood; the porosity of beech charcoal is ca 70%; the bulk density of charcoal, which depends on the kind of wood an
Vapor Pressure1 mm Hg at 3586 °C
SolubilitySolubility in water: none

OSHA & HazCom Compliance Requirements

For construction work, Hazard Communication is governed by 29 CFR 1926.59 (adopts 29 CFR 1910.1200). Employers who use Graphite must:

  • •Maintain an accessible SDS for Graphite (readily accessible during each work shift, 29 CFR 1910.1200(g)(8))
  • •Label all containers with GHS-compliant labels (29 CFR 1910.1200(f)(1) shipped / 29 CFR 1910.1200(f)(6) workplace)
  • •Include it in the workplace chemical inventory
  • •Train employees on hazards before initial assignment
  • •Retain employee exposure and medical records per 29 CFR 1910.1020 — 30-year retention applies to exposure/medical records, not to SDSs generically

HazCom (1910.1200 / construction 1926.59) covers labels, SDSs, and training only — it does not impose chemical storage segregation. Flammable & combustible liquid storage for construction is 29 CFR 1926.152; segregation of incompatibles is planned from SDS Sections 7 and 10. Not legal advice; state-plan states may have stricter rules.

Handling & Secondary-Container Labeling

When you transfer Graphite into a workplace (secondary) container, OSHA gives two compliant options under 29 CFR 1910.1200(f)(6):

  • •(f)(6)(i): full GHS label elements (as on the shipped container)
  • •(f)(6)(ii): product identifier + words/pictures/symbols (or combination) that provide AT LEAST general information on the hazards

There is no volume/size cutoff for secondary containers — the ≤100 ml / ≤3 ml accommodations (29 CFR 1910.1200(f)(12) (added by the HCS 2024 final rule)) apply only to the manufacturer's shipped container. A portable container filled for the immediate use of the worker who fills it needs no label (29 CFR 1910.1200(f)(8)).

GHS Hazard Classification under OSHA HCS

OSHA's Hazard Communication Standard adopts the GHS (primarily GHS Revision 7 (HCS 2024)). It requires 8 hazard pictograms (Appendix C, Figure C.1). The Environment pictogram (GHS09) is not required by OSHA — Not in App C; outside OSHA jurisdiction; voluntary.

The 8 OSHA-required pictograms:

FlameFlame Over CircleExclamation MarkExploding BombCorrosionGas CylinderHealth HazardSkull and Crossbones

For flammable liquids, OSHA classifies by flash point and boiling point (App B.6.1 / 1910.106(a)):

  • •Category 1: FP < 73.4°F AND BP <= 95°F
  • •Category 2: FP < 73.4°F AND BP > 95°F
  • •Category 3: FP >= 73.4°F AND <= 140°F
  • •Category 4: FP > 140°F AND <= 199.4°F

The specific GHS classification of Graphite comes from its Safety Data Sheet (Section 2). Use the live classification panel above and the manufacturer SDS to confirm pictograms and categories.

HCS 2024 Update Deadlines

Under the Hazard Communication Standard 2024 update (aligned primarily GHS Revision 7):

  • •May 19, 2026 — manufacturers, importers, and distributors update substance labels & SDSs (1910.1200(j)(2)(i))
  • •November 20, 2026 — employers update workplace labeling, the written program & training (1910.1200(j)(2)(ii))

During the interim, parts may comply with the 2012 HCS, the 2024 HCS, or both.

Quick Actions

Put Graphite on your written inventory, print the workplace label your containers need, and keep your supplier’s sheet reachable on the jobsite.

The safety data sheet for your product comes from the supplier who sold it to you — no public registry can provide it. For the underlying chemistry, the public record is on PubChem.

Where this fits in your HazCom program

  • SDS management — collecting the sheet, keeping it current, and making it readable during each work shift.
  • GHS labels & workplace labeling — what has to appear on the shipped container, and what a secondary container needs instead.

Frequently Asked Questions

What is Graphite (CAS 7782-42-5)?

Lubricant and electrode material

What are the OSHA HazCom requirements for Graphite on a construction site?

For construction work, Hazard Communication is governed by 29 CFR 1926.59 (adopts 29 CFR 1910.1200). Employers who use Graphite must maintain an accessible Safety Data Sheet (SDS), label containers with GHS-compliant labels, include the chemical in the workplace chemical inventory, and train workers on its hazards before initial assignment.

What is the OSHA permissible exposure limit (PEL) for Graphite?

The applicable exposure limit (OSHA PEL, and where stricter, the ACGIH TLV or NIOSH REL) for Graphite is listed in Section 8 of its Safety Data Sheet. OSHA construction air-contaminant limits are in Table 1 to 29 CFR 1926.55; many OSHA PELs predate current science, so an SDS may cite a more protective ACGIH/NIOSH value.

When does the updated HCS 2024 labeling apply to Graphite?

Under the Hazard Communication Standard 2024 update (aligned primarily GHS Revision 7), chemical manufacturers, importers, and distributors must update substance labels and SDSs by May 19, 2026, and employers must update workplace labeling, the written program, and training for substances by November 20, 2026. During the interim, parties may comply with the 2012 HCS, the 2024 HCS, or both.

How do I label a secondary (workplace) container of Graphite?

Under 29 CFR 1910.1200(f)(6) you have two options: (i) the full GHS label elements as on the shipped container, or (ii) the product identifier plus words, pictures, symbols, or a combination that provide at least general hazard information. There is no volume/size cutoff for secondary containers. A portable container filled for the immediate use of the worker who fills it does not require a label (29 CFR 1910.1200(f)(8)).

How long must SDS and exposure records for Graphite be kept?

Under 29 CFR 1910.1020, 30-year retention applies to employee exposure and medical records (medical records: duration of employment plus 30 years) — not to SDSs generically. Where an SDS is not retained, a record of the chemical's identity, where it was used, and when must be kept for at least 30 years.

Where can I find the SDS for Graphite?

Under 29 CFR 1910.1200(g)(6) and (g)(7), the manufacturer, importer or distributor that sold you Graphite must send its Safety Data Sheet with the first shipment, and again with the first shipment after the sheet is updated. HazComFast keeps the sheets you collect in one inventory per jobsite, searchable by product, manufacturer or CAS number, and your jobsite's SDS load onto the phone on their own.

Regulatory data on this page is sourced from HazComFast's verified regulatory module (29 CFR 1926.59 / 1910.1200 and substance-specific 1926 standards), last verified October 5, 2026 against eCFR, OSHA.gov, and the Federal Register. Physical-property data comes from PubChem. Confirm it against the manufacturer Safety Data Sheet. This page is informational and is not legal advice.

Looking for more chemicals?

Browse our database of industrial chemicals with GHS data, safety information, and compliance tools.

Get the Binder in Order Before the Inspector Arrives. Are You Ready?

OSHA does not give advance notice of inspections (29 CFR 1903.6). Get the binder in order before the opening conference, not during it.

Serious Violation

$16,550

per violation (max)

HazComFast Pro

$199/mo

10 jobsites, unlimited chemicals, unlimited workers

New sign-ups are paused. The free tools below need no account, and customers can log in as usual.

Your account keeps working as usual. Cancel anytime.