Skip to content

Urgent: Nov 20, 2026 — HCS 2024 Deadline. Get ready →

SDS

Missing SDS in California: the 7, 15 and 25 day rules

Verified vs OSHA sources · October 19, 2026

By HazComFastPublished November 15, 202611 min read
Two U.S. Navy personnel reviewing a safety data sheet aboard USS Ross.
Reviewing a safety data sheet during a drill aboard USS Ross, April 2018. Photo: “180426-N-RG482-187 (41696273622).jpg”, Commander, U.S. Naval Forces Europe-Africa/U.S. 6th Fleet, Public domain. Cropped to 3:2 and resized to 1200 x 800 pixels; no other alteration.
HazComFastLast reviewed November 15, 2026Verified vs OSHA sources · October 19, 2026

A maintenance supervisor finds a solvent in the cabinet but cannot find its SDS. Purchasing has the supplier on file. A worker needs the sheet before the next cleaning task. In California, that finding starts a request process with several deadlines. A single reminder labeled “SDS due in 25 days” misses the distinctions.

California's missing SDS process is in 8 CCR 5194(g)(12). It distinguishes a written inquiry in the seven working days after noting missing information, a notice or copy in the fifteen days after receiving the sheet, and an escalation after twenty-five working days without a response.

Keep California's steps separate from your federal procedure. Federal 29 CFR 1910.1200(g)(6)(iii) tells an employer to obtain an unprovided SDS as soon as possible. It does not contain California's numbered sequence. Our supplier request guide explains that federal starting point. California adds the steps below.

Identify what is missing before starting the request

8 CCR §5194(g)(12) addresses a sheet, or information needed on it, that has not been furnished to the employer by the responsible manufacturer or importer. A sheet may exist in the library and still leave a needed item unresolved. Record the product identifier, manufacturer, revision date if available, and the specific missing information.

Distinguish a missing supplier document from an internal access failure. A PDF saved in purchasing's mailbox may already have been furnished, while workers still cannot obtain it. Retrieving that copy and fixing access addresses a different problem from asking the manufacturer for a document it never sent. Federal 29 CFR 1910.1200(g)(1) and (g)(8) separate having the sheet from making it readily accessible; California's workplace duties also need attention alongside the request process.

Use the product's actual identifier. A sheet for a similar trade name, another concentration or another supplier cannot silently close the gap. The SDS gap triage article helps prioritize work where several products are involved. The sheet must match the hazardous chemical used under 29 CFR 1910.1200(g). Record the mismatch instead of filing a similar product's sheet as the answer.

Keep the four actions separate

Section 5194(g)(12) assigns four actions. Two involve writing to the requester: one reports the inquiry, and the other reports that the SDS has arrived.

ProvisionTrigger or conditionNeeded actionTime language in the text
§5194(g)(12)(A)Employer notes the missing informationMake written inquiry to the responsible manufacturer or importer for a complete sheetSeven working days
§5194(g)(12)(B)Inquiry and any responseNotify the requester in writing about the inquiry date, recipient and response, if anyNo separate deadline stated
§5194(g)(12)(C)Employer receives the SDSNotify the requester that it is available, or provide a copyFifteen days from receipt
§5194(g)(12)(D)No response within the stated periodSend the Director a copy of the written inquiryTwenty-five working days

Do not turn this table into a grace period for controlling exposure. Federal 29 CFR 1910.1200(h)(1) concerns effective information and training at initial assignment and when a new chemical hazard is introduced. California's parallel training duty is in §5194(h). Neither is satisfied by a future follow-up date.

The seven working day clock starts at the finding

Paragraph (A) ties the request to the employer noting the missing information. The finding may follow a worker's request or the employer's own attempt to meet §5194(g)(1). A receiving date can help reconstruct events, but it is not automatically the date the rule names.

For example, suppose an inventory review on Monday identifies a missing sheet. Your issue log should preserve Monday as the finding date, even if purchasing receives the assignment on Wednesday. The example is a recordkeeping recommendation, not a separate legal definition of how to count working days. It prevents an internal handoff from overwriting the event the rule uses.

The inquiry must be written and go to the manufacturer or importer responsible for the SDS. Asking a distributor to assist can be useful, but document who is responsible and whether the written inquiry reached that party. Under federal 29 CFR 1910.1200(g)(6), several supply-chain participants have obligations; that federal structure does not change the addressee specified in California's paragraph (A).

Paragraph (A) also includes circumstances in which another request is unnecessary after an earlier written inquiry: one relating to whether the product is subject to the Act within the previous twelve months, or one seeking new, revised or later SDS information within the previous six months. Check the text and retain the earlier inquiry before relying on either provision. An undocumented recollection that someone asked last year is a poor basis for closing the assignment.

Tell the requester what you did

Paragraph (B) calls for a written notification identifying the inquiry date, its recipient and the response, if any. Providing the requester copies of the inquiry and response is an expressly described way to satisfy this duty. The paragraph does not set a separate numerical deadline.

This notice concerns the search. The later paragraph (C) concerns the sheet's availability after receipt. A message saying “purchasing is checking” may be useful service, but it does not necessarily contain the information paragraph (B) calls for. Keep the requester attached to the issue so that a reply from the supplier reaches the person who raised it.

The Subcontractor RFI Writer can help prepare the request. Check the recipient and product details before sending it, and assign someone to follow the response. Preparing a letter alone does not meet the duty to obtain the SDS under federal 29 CFR 1910.1200(g)(6)(iii).

Receipt starts a different fifteen day period

When the SDS arrives, paragraph (C) calls for notification of its availability or a copy to the requester in the fifteen days after receipt. It does not say fifteen working days. It also does not start this period with the original worker request or the manufacturer's shipment of the chemical.

Preserve the receipt date from the email, portal submission or other delivery record. Verify the attachment before marking the issue closed. An unrelated PDF, an incomplete response or a broken link should not be recorded as a complete sheet merely because the supplier replied.

Then make the accepted document available where the work occurs. Under federal 29 CFR 1910.1200(g)(8), access must be ready during each shift. In California, consult §5194(g)(8) for the corresponding duty. A timely availability notice will not cure a library that workers cannot open. The digital SDS article explains the separate access question.

Escalate supplier silence without inventing a clock

Paragraph (D) calls for a copy of the written inquiry to be sent to the Director if no response has been received within twenty-five working days. Unlike paragraph (C), it does not expressly identify the starting event in its sentence. DIR's Hazard Communication guidance describes the period in relation to the request. Keep that agency explanation distinct from the wording of the regulation.

An internal schedule can use the date of the written supplier inquiry for follow-up, provided it is identified as your implementation of the agency guidance rather than a quotation from (D). Maintain the original finding date as well. Do not restart either history when an employee changes assignments or the issue is moved between systems.

Use current DIR contact instructions for the delivery route. The regulation names the Director; copying a random federal OSHA mailbox is not the same action. Federal 29 CFR 1910.1200(g)(6) does not establish this California escalation channel. Avoid hard-coding a mailing address from an old brochure into a procedure that no one reviews.

A documented request does not answer the exposure decision

The supervisor still needs to decide what work can be performed with the information available. Identify the task, who may be exposed, the known hazards and the missing information. Stop or change work when necessary protective measures cannot be established. Explain the decision in the issue record rather than treating the supplier's silence as a purchasing problem alone.

An older sheet may provide useful hazard information while you seek a current or complete response. Its age alone does not decide whether it is adequate. Federal 29 CFR 1910.1200(g)(5) places a significant-new-information update duty on the sheet's preparer; it does not impose a universal employer replacement interval. SDSs do not expire, so do not write an automatic expiration date into the California request process.

For the solvent example, a supervisor could defer a cleaning task until the actual product's hazards and controls are established, or select an already assessed alternative. That is a hypothetical management decision, not a finding that every missing sheet legally mandates the same response. The applicable access, training and exposure-control obligations govern the actual work.

Make closure visible to the next shift

Keep the finding, inquiry and supplier response together with the requester notices and accepted sheet. Add where the product is used and how work was handled while information was missing. This is a suggested issue record. Section 5194(g)(12) prescribes actions, not a software form.

Use separate status descriptions such as inquiry sent, supplier response under review, sheet accepted and requester informed. Federal 29 CFR 1910.1200(e)(1) requires a written program describing the employer's implementation arrangements. California's §5194(e) does the same job for the state program. Describe who owns each handoff in that program, with a backup for absences.

Before closing the solvent issue, ask the next shift's supervisor to retrieve the accepted sheet through the normal workplace route. Keep the result with the issue. That last check catches a familiar failure: purchasing has closed the request, but the worker still cannot open the sheet.

Frequently Asked Questions

When does California's seven working day SDS request period start?

Under 8 CCR §5194(g)(12)(A), it starts when the employer notes the missing information, whether through a request or an effort to comply with the workplace SDS requirement. The employer makes written inquiry to the responsible manufacturer or importer.

Are all three California SDS deadlines in working days?

No. 8 CCR §5194(g)(12)(A) says seven working days and (D) says twenty-five working days. Paragraph (C) says fifteen days, without working, from receipt of the SDS. The section does not provide a complete calendar calculation method.

Does a written SDS request permit continued chemical use?

The request process in 8 CCR §5194(g)(12) does not waive SDS availability, hazard communication or protective duties. Federal 29 CFR 1910.1200(g)(8) likewise requires ready access during each work shift. Assess the information and controls needed for the actual work.

Where does the twenty-five working day escalation go?

8 CCR §5194(g)(12)(D) directs the employer to send the Director a copy of the written inquiry when a response has not been received within twenty-five working days. Consult current DIR instructions for the submission route. The paragraph does not expressly state its starting event.

Site-wide regulatory figures such as compliance dates and penalty amounts come from our regulatory source-of-truth modules, last checked against the eCFR, OSHA.gov, and the Federal Register on October 19, 2026. Last reviewed November 15, 2026.

About This Article

Published by: HazComFast

Published: November 15, 2026

Last Updated: November 15, 2026

This content is for informational purposes only and does not constitute legal advice.

Ready to simplify your HazCom compliance?

HazComFast keeps your SDS library, GHS labels, and training records audit-ready, with the jobsite's SDS on the crew's phones.