Skip to content

Urgent: Nov 20, 2026 — HCS 2024 Deadline. Get ready →

August Safety Topics and Meeting Plan

Finding and fixing hazards. The month of OSHA's Safe + Sound campaign on safety programs. The plan below gives 4 meetings, one a week, and one optional meeting: each with its objective, a full toolbox talk, a safe activity, a question for the crew and what to check afterward.

At a glance

  • 5 meetings for August, each linked to a full toolbox talk with a PDF and a sign-in sheet.
  • A HazComFast proposal, not an OSHA calendar. Move the meetings to the weeks when the work happens.
  • The PDF and Word plan repeat the meetings and add a follow-up sheet for the actions raised.

August follows the idea of OSHA's Safe + Sound campaign: find hazards and fix them. The sessions cover the energy controlled before anyone works on a machine, the guards that keep hands out, the pinch points, and the follow-up that closes a reported hazard.

Where August is still hot, keep the water and shade of the July plan in place. The exercises here involve no real servicing: the crew identifies, names and checks, and nobody opens a machine during the meeting.

The August meetings

Meeting 1 · about 12 minutes

Energy before servicing

Objective
For one machine, the crew names every energy source and who locks each one out.
Activity
At one machine, with nothing opened or serviced, list its energy sources: electrical, mechanical, hydraulic, pneumatic, gravity and stored. Name the authorized employees and the affected employees.
Ask the crew
Who may lock out this machine, and who needs to be told?
Check afterward
The energy control procedure for that machine is found, and it matches what the crew listed.
Full talk: Lockout/Tagout (LOTO) Procedures

Meeting 2 · about 5 minutes

Guards

Objective
Every guard on the machines in use is in place and working.
Activity
Look at the guards of one machine and find any that are missing, loose or bypassed.
Ask the crew
What do you do if you find a guard removed?
Check afterward
Missing guards are reported, and the machine stays out of use until the guard is back.
Full talk: Machine Guarding

Meeting 3 · about 5 minutes

Pinch points

Objective
Each person can point to the pinch points in their own task.
Activity
Each person names one pinch point in today's work and where their hands go instead.
Ask the crew
Where are your hands when the load or the part moves?
Check afterward
The pinch points named are guarded, marked or worked with a tool instead of a hand.
Full talk: Pinch Points

Meeting 4 · about 5 minutes

Closing a reported hazard

Objective
A hazard reported this summer is followed to its fix, and the person who reported it hears back.
Activity
Take one hazard reported in the past months and follow it: who owns it, what was done, whether it is closed.
Ask the crew
What happened to the last hazard you reported?
Check afterward
Open hazards have an owner and a date, and closed ones were checked on site.
Full talk: Near Miss Reporting

Optional meeting · about 5 minutes

Seeing hazards before they bite

Objective
Before each task, the crew looks above, below and around.
Activity
At one work area, give the crew one minute to list what could fall, move or start up.
Ask the crew
What did you notice today that you walked past yesterday?
Check afterward
One new hazard spotted in the meeting has an owner.
Full talk: Situational Awareness

Before the first meeting

  • Choose the machine for the lockout exercise and get its energy control procedure.
  • List the hazards reported since spring and where each one stands.
  • Walk the machines in use and note any guard to look at with the crew.
  • Keep water and shade in place for the hot days.

Keep a record of each meeting with the free safety meeting sign-in sheet. A signature shows who was there, not what each person understood, so the check after each meeting matters as much as the signatures.

Campaigns and events in August

OSHA's Safe + Sound Week has taken place in August; in 2026 it ran from August 10 to 16. OSHA publishes each year's dates on its site. OSHA, Safe + Sound Week

The rest of the year

Each month has its own plan. The monthly safety topics page shows the whole year on one page, and the safety topics library has every toolbox talk by hazard, trade and season.

Sources

In a State Plan state, the state's own standard applies, and it can be stricter than the federal rule. Not legal advice.

Inside HazComFast

Run the August meetings, keep every signature

Print each talk for the meeting. In HazComFast, the crew signs the toolbox talk on a phone, in English or Spanish, and the record stays with each worker.

  • Signed where the signal isn't

    In a basement or a dead zone, the crew can still sign the toolbox talk in Chrome on Android or on a computer. The sign-ins go out once the app is open with a signal again, and each one lands once.
  • Sheets and certificates in Spanish

    Toolbox talk PDFs and training certificates print in Spanish, and compliance reports come out in English, Spanish or both side by side.
  • Thirty hires on a Monday morning

    Import a spreadsheet, see line by line who was created and who wasn't, and print one sheet of QR badges for the morning toolbox talk. Email is optional.
  • Records that stay when a worker leaves

    When a worker leaves, their training records and competent person designation stay on file. The account can't take them along.

New sign-ups are paused · the free tools need no account